Which generator is best in IC2?

No need to do this all the time, just create a set of magma units (costing 16 tin ingots and 64 magma) that will last you for a while. If you have bmod, just use a water pump to pump. magma in hell and connect it to the generator. A magma unit is like 10,000 eu, which is definitely enough at first, even if it's a uu machine it's a good choice as long as you use one. BC water pump to pump it all the time 3q. Some say the wind is good? If wind power has enough resources, it can be produced on a large scale and left alone. However, wind power itself does not have much electricity, and the wires will be lost, so it stands to reason that diamond wires cannot be used. are expensive, and wind power does not. How much electricity (the advantage is that you leave it alone) should be connected to a storage box, and it isIt's not easy to die if installed hundreds of meters high. can be produced using forest fermentation machines, synthesized and compressed with plant fermentation plants or seeds. However, too many seeds and young trees are consumed and little biomass is produced. Biomass bottles can be placed inside. But not the biomass unit. It seems I can't put any units. It's not a liquid problem, but a bottle problem. In addition to the unit, there is also a bottle of similar length to the unit, but with a different name. You can also use a waterproof conduit to pump it. If there is logging, use forest cans instead of industrial units. Forest cans can be put in it. It is also possible to use a general fluidic unit. There is no forestry. . . Afterwards,you can only use the general fluid unit. Although the semi-fluid generator is synthesized using a geothermal generator, it is relatively wasteful to go to hell and use a pump to pump magma into the geothermal generator, and drain a magma lake to create a final hybrid. And thanks to pipeline automation, there is no longer any need to consume bottles. But someone has to be there for the data in the block to be loaded. . . . The compressed plants must be fermented into biomass before the biomass can be loaded into the fluid unit. As for how to ferment. It seems the only fermentation machines I know of are forest fermentation machines. There is no forestry. . . . Without logging, compression facilities seem of little use. You can press the g key to check the summary table. There may be machines in industrial machines that process compressed plants. This is for storing items that need to be recharged, but if you want to produce wind and solar power, it is recommended to build a lot of them and connect them to a storage box. Oh, I forgot to mention, this can transport water to the hydroelectric generator. Simply connect it directly to the hydroelectric generator. Connect to the hydroelectric generator, and the industrial pump can also charge the geothermal generator (you need to connect the magma then connect the geothermal generator). The side with copper ring material is attached to the copper ring material side of the equipment that can be heated to absorb heat, such as solid/liquid fuel heaters, heat exchangers liquids, etc. It is best to attach it to the radioactive isotope. A heater rather than a userdirectly ser the radioactive isotope. Just like a generator, liquid heat exchangers do not need to use hot coolant from nuclear power plants.