Desert photovoltaic piles are high-strength composite photovoltaic piles developed for deserts, beaches, saline and alkaline lands and geological environments where groundwater seepage tends to collapse. They are resistant to acids and alkalis. long life and easy to build. Advantages, it completely solves the defects of traditional spiral steel photovoltaic installations which are easy to corrode, and the construction of cast-in-place concrete piles is difficult and expensive. the photovoltaic support system.
Relevant knowledge of metal piles
Dimensions and models of metal piles
(
Unit: millimeters< /p > p>
mm)
A*B*H
51 * 150*600
71*150*750
71*150 *900
71*200*950
76*150*750 p>
91*150*750
91*150*900
< p>91*200*950 < /p>
96**150*750
< p>101*150*900
101*150*950
< p>101*200*950
121*200*900
How to use metal piles
1 p>
How to use metal stakes for fences
Metal stakes for fences
Typically used for tying and tightening metal fence nets ,
play a fixing role,
prevent being broken by livestock such as cattle and sheep, < /p>
Or, it can be damaged by catastrophic weather conditions, forcing cattle and sheep to cross the border and foreigners to enter at will, causing unnecessary losses.
Generally, you can use a hammer to hit the upper square position of the stake on the ground. Depending on the geological conditions of the soil,press
8
for <. /p>< p>10
Ground stakes can be driven into the ground and secured.
When using,
Please note that
Always pay attention to the condition of the ground where the stake is inserted,
< p>avoid it from falling on the groundp>
Stones block the path of the piles in the ground,
in order to prevent the piles from penetrating into the ground. Smooth,
causing damage to the piles on the ground.
At the same time,
should also pay attention to the softness and hardness of the ground
to avoid soft ground causing poor reinforcement performance.
2
How to use spiral ground stakes
Screw ground stakes
are usually used to reinforce tents in sandy areas.
p>
Prevent the tent from being blown away by the wind.
At the same time, the spiral pile has better gripping ability than the general oblique pile in thesandy and soft soils
.
Usually you need an iron rod of about
1
cm in diameter, inserted into the small hole at the top of the stake in opposite directions, and then
Turn the stake clockwise until the spiral part penetrates the sandy soil.
Note that
screw piles cannot be used in hard ground conditions
to avoid a decrease in work efficiency.
3
How to use metal wooden leg protection stakes
Metal wooden leg protection stakes
Used to protect wood The wooden support legs of the appliance prevent damage during use and extend the life of the wooden appliance.
When using,
should choose appropriate size wooden leg protection stakes
Place the wooden leg protection stakeson the feet of wooden appliances
Insert it all the way,
then tighten it with wood screws and you can use it.
Classification of metal piles on the ground
1
,
Living metal piles
< p>Used to fix wooden fences, used for tents, mobile homes, greenhouses, flag poles, guardrails, fences, etc.,
Can be used repeatedly for a long time< /p>
use.
2
,
Square metal ground stakes
are used to secure fences in drink.
Used for tents,
mobile homes,
greenhouses,
flag poles,
< p>guardrails,p>
p>
Fences, etc.
,
can be reused for a long time.
3
,
Metal stakes for gardens or lawns
Various supports, mini
L p>
type,
H
type,
T-T
type,
U-L
type,
T
type p>
4
,
In-line metal stakes for gardens or lawns
Including various supports, mini type< /p>
L
,
p>< p>H
Type,
Type T-T
,
Type U-L
,
T
Type
5
,
Metal spiral nails for gardens or lawns
Mainly used in soft soils Earth or sand
,< /p>
Includes various supports, mini
L
type,
H
type,
< p>T-Ttype,
U-L
type,
T< /p>
Type
< p>6
,
Bolt type metal ground stakes for gardens or lawns
Including various brackets, mini type
L
,
type H
,
T-T
type,
type U-L
type,
type T
type
< /p>
7
,
Cement type garden or lawn stakes
Includes various supports, mini
p>L
type,
type H
type,
type T-T
type,
Type U-L
,
Type T
Type
Lifespan of metal piles
p>
1
. Material of metal piles
Metal piles
are generally made of ordinary steel and are welded. Use
. 2-5mm iron sheets,
10
10mm gold
processed iron from rods.
2
Metal pile processing technology
Metal piles
are generally cut, The Bending, welding, pickling, electroplating, shaping and other processes can produce qualified metal piles. Among them, pickling and electroplating is an important anti-corrosion treatment process, which directly affects the service life of metal piles.
3
Factors affecting the service life of metal piles
The level of metal processing directly determinest the lifespan of the metal pile on the ground. For example, the quality of the selected metal iron, the quality level of the welding points, whether there are blisters, false welds, flaking and the thickness of the welding points, all that. will affect the future service life and subsequent addition of metal piles
The manufacturing quality,
Pickling is an important basic anti-corrosion process,
and the quality of electroplating,
such as electric time,
Good surface treatment
If damaged, it will affect the quality of anti-treatment -corrosion of metal piles. In most cases, the plastic reshaping process aims to improve the appearance of the pile.
The environment and method of use also affect the life of metal piles, such as soil acidity and alkalinity, whether the operation is appropriate
Improper use,
will damage the surfacemetal piles,
will damage the metal protective layer,
will lead to gold.
p>
Corrosion of piles is accelerated and their lifespan is reduced.
Under normal circumstances, metal piles can be used
8 to 10
years