Yes. By 2020, the market demand for lithium battery coating machine equipment will reach about 2.7 billion square meters, generating profits of more than 100 billion. So lithium battery coating machine equipment has a future. "Lithium battery" is a type of battery that uses lithium metal or lithium alloy as the negative electrode material and uses non-aqueous electrolyte solution.
How to debug lithium battery coating machine
1. When the I-station vertical folding knife body moves downward under the pressure of the cylinder, the lithium-ion battery is folded.
2. Due to the cylinder pressure, the vertical foldable cutting body of the I station will advance the linear guide rail.
3. Due to the action of the oblique blade body of the horizontal folding blade of the I station, the folded edge of the lithium-ion batteryfolded moves to a horizontal state.
Installation and debugging
(1) Use tools with insulating sleeves such as pliers. Using uninsulated tools may cause the battery to short circuit, generate heat or burns, thereby damaging the battery.
(2) Do not place the battery in a closed room or near a fire source, otherwise it may explode or catch fire due to hydrogen gas released from the battery.
(3) Do not use thinner, gasoline, kerosene or synthetic fluid to clean the battery. Using the above materials may cause the battery case to rupture, leak or catch fire.
(4) When handling batteries with a voltage of 45 volts or more, take safety precautions and wear insulating rubber gloves, otherwise you may suffer an electric shock.
(5) Do not place the battery in a place that maycould be flooded. If the battery is immersed in water, it may burn or cause an electric shock.
(6) Please handle it slowly when removing the battery. Do not cause the battery to rupture or leak.
(7) When installing the battery on the equipment, try to install it at the bottom of the equipment to facilitate inspection, maintenance and replacement.
(8) Do not move the battery while charging. Do not underestimate the weight of the battery, careless handling may cause injury to the operator.
(9) Do not cover the battery with materials that may produce static electricity. Static electricity can cause fire or explosion.
(10) Use insulating covers on battery terminals and connecting parts to avoid injury caused by electric shock.
(11) Battery installation and maintenance must bet be carried out by qualified personnel. Such an operation carried out by an unqualified person could be dangerous.