ICr lithium battery refers to a ternary lithium battery, a type of lithium battery.
Ternary polymer lithium batteries refer to lithium batteries with ternary cathode materials using lithium-nickel-cobalt manganate (Li(NiCoMn)O2) or aluminate lithium-nickel-cobalt as cathode material. is composed of nickel salt, cobalt salt and manganese salt as raw materials. The proportion of nickel, cobalt and manganese can be adjusted according to actual needs.
The battery with ternary material as positive electrode is safer than lithium cobalt oxide battery, but the voltage is too low when used on mobile phones (the cut-off voltage of cell phones is usually around 3.0V). , there will be obvious insufficient capacity.
Parameters
Rated capacity: 1 250mAh
Standard continuous discharge current: 0.2C
Maximum continuous discharge current: 1C
Discharge: -10~60℃
Product size: MAX 9.5×35×52mm
Finished product internal resistance: ≤150mΩ
Cable model: UL1007/24# national standard wire, length wire length 55 mm
Overload protection voltage: 4.325 ± 0.025 V per string
Over discharge protection voltage: 2.5 ± 0.05 V
Overcurrent value: 2~6A or 3-8A
For the above content, please refer to Baidu Encyclopedia-Ternary lithium battery
It will be equipped with a 5V2A charging head and the accompanying cable. It can be fully charged in about 10 minutes when the light is red, which is very convenient.
Usually the light on the button will flash while charging. If the light stays on and does not flash, it means the battery is fully chargede.
The batteries currently used in e-cigarettes are generally lithium batteries or IMR batteries. These batteries themselves do not have a memory effect. If they are completely exhausted before use, it will affect battery life. you should charge your battery when it reaches 3.2V, rather than waiting until it is completely empty before charging it.
It is generally best to smoke e-cigarettes when the battery charge is above 30%. Modern electronic devices are generally best used this way, such as iPads, cell phones, and Bluetooth speakers. The batteries in these devices are meant to be charged as they go, rather than waiting to be fully charged when they are empty. Frequently charging small amounts like this will extend the life of your battery than if it were completely charged.ent loaded every time.