The Lishen lithium iron phosphate that I stored under normal conditions at half power 2 years ago was above 66V, and now it is above 65V. When I stored it, I disconnected the main line of the protection board for the power supply, but the detection line was not disconnected. Additionally, there are several free lithium iron phosphate monomers that have been extracted from other copy factories and have been stored at half strength for 3 months in a normal environment. All were over discharged. iron phosphate and how does the iron removal process take place in the production process? That has a lot to do with it. The copier manufacturer did not directly carry out the iron removal process.
Online shopping The lithium iron phosphate battery cellis new and not disassembled.
The electrochemical performance of the materialcathode of lithium iron phosphate battery are relatively stable, which determines that it has a stable charging and discharging platform. Therefore, the battery structure will not change during. the process of charging and discharging. It will not burn or explode and remains very safe even under special conditions such as short circuit, overload, extrusion, acupuncture, etc.
On the left side of the lithium iron phosphate battery is the positive electrode made of LiFePO4 material with an olivine structure, which is connected to the positive electrode of the battery by an aluminum foil. On the right is the negative electrode of the battery made of carbon (graphite), which is connected to the negative electrode of the battery by a copper foil. In the middle is a polymer separator that separates the positive electrode from the negative electrode. Lithium ions can pass through the separator but the electrons cannot cross the separator. The battery is filled with electrolyte and the battery is sealed by a metal case.