Distinguish whether Chaowei batteries are old or new:
First of all, when consumers buy batteries, they are the first to see whether the outer packaging of the battery of the electric vehicle is damaged or broken. , then open the package to examine the battery. Pay attention to the appearance of the battery and check whether there are scratches and scratches on the surface and whether there is rust on the positive and negative metal terminal parts of the battery.
In addition, many brands of factory electric vehicle batteries will have a safety label affixed to the battery case. Pay attention to whether the safety label is normal. If necessary, you can scrape off the password coating. on the security label to verify authenticity. Finally, look at the production date on the battery.
At the same time, consumers must remember that the formerennes and new batteries cannot be connected together. New original batteries are packaged and assembled before leaving the factory. If mixed with old batteries, it will affect the performance of new batteries and cause premature aging of new batteries.
Detailed information:
Notes:
Lithium batteries
Traditional lead-acid batteries, nickel-cadmium batteries and nickel-cadmium batteries metal hydride Technically mature, their use as power batteries in cars is problematic. Currently, more and more automobile manufacturers choose lithium batteries as the power batteries for new energy vehicles. Because lithium-ion batteries have the following advantages:
High operating voltage (tthree times that of nickel-cadmium batteries and nickel-hydrogen batteries) higher energy (up to 165WH/kg, three times that of nickel-metal hydride batteries) volume Small; light quality; long life expectancy ; low self-discharge rate; no memory effect;
Lithium iron phosphate battery
Lithium iron phosphate battery is also a type of lithium battery. Its energy is less than half of that of lithium cobalt oxide battery, but it has high safety and. long cycle times. Up to 2000 times, stable discharge, low price, becoming a new choice for automobile power supply. The industry considers the "iron battery" offered by BYD to be a lithium iron phosphate battery.
Fuel Cell
In simple terms, a fuel cell is an electricity generating device that directly converts the chemical energy contained in fuel and comburant in electrical energy. Fuel and air are fed into the fuel cell and electricity is magically produced.
It has positive and negative electrodes and electrolytes and looks like a battery, but basically it cannot store electricity, but it is a power plant. The proton exchange membrane fuel cell is the most promising solution for automobiles.
What should I do if the battery cannot be charged after being left for a long time?
Charge a battery with current and a constant voltage, and then discharge it with a constant current. The amount of power released depends on the battery capacity. Batteries, nickel-metal hydride batteries, etc., but lithium batteries are not suitable. They have a minimum discharge voltage, that is, the discharge voltage cannot be lower than 2.75 V. Usualllly, 3.0 V is used as the lower limit for protection. the battery.pressure.
For example, if the capacity of a lithium battery is 1000 mAh, the charge and discharge current will be 1000 mA. If the maximum battery voltage is 3.0 V within 4.2 V, the released capacity is the actual capacity. drums.
Detailed informationBattery capacity recovery method
A rechargeable battery whose capacity has been reduced can be loaded using the incentive method. To restore the battery capacity to its original state, the specific method is as follows:
1. Discharge the remaining battery current first: you can use a flashlight or small bulb to discharge until the battery filament is discharged. The flashlight or small bulb turns red and stops discharging. Note: Do not leave the tBattery voltage drops below 0.9 V during discharge.
2. Add a nanocarbon ground battery activator, then charge with 100-200mA current at 1.5 times the capacity. Then immediately use a 5-10 Ω load (small bulb or electric oven wire) to discharge.
3. Charge again with 100-200mA current, charge to 1.2 times capacity, then discharge again.
4. Repeat this operation 4 to 5 times. From the third time, the charging current should not exceed 100mA, and the charging time should not exceed 1.2 times the capacity. Such charging helps restore the original battery capacity for general rechargeable batteries whose electrolyte is not dried.
Baidu Encyclopedia - Battery Capacity
What should I do if the battery cannot be charged after being discharged for a long time?
Solution:
1. When using itWhen using a smart charger, there will be an activation mode.
2. When charging, connect a charged battery in parallel and charge.
Because once the battery is over-discharged, a directly connected charger usually will not be able to charge, because the charger will think that the charging clip is not fixed on the battery pole.
Maintenance-free batteries, because under normal charging voltage, the electrolyte produces only a small amount of gas, the plates have strong overcharge resistance and have low internal resistance, good low temperature starting performance and are better than conventional batteries. The battery has a long service life, so there is no need to add distilled water during the entire period of use, under normal charging system conditions, there is no need to remove it for an additional charge. However, the density of the electrolyte must bebe checked during maintenance.
First wash the battery with clean water, then add electrolyte (available in the market), then charge it for about 16 hours, then use a 5cm long electric cooker wire. to connect the battery Discharge the positive and negative electrodes for about 4 hours Do this for 4 cycles to ensure that your battery recovers more than 50% of its capacity, but the prerequisite is that the plates are not broken.
What should I do if the mobile phone battery has not been used for a long time and cannot be charged?If the mobile phone cannot be charged, it is recommended to try the following methods:
1. Turn off the phone, remove the battery and wipe it with a cotton swab. Phone battery and contact points.
2. Use the original charger to connect to the domestic power supplytick for loading.
3. Try to change the power outlet or change a data cable to connect to the charger for charging.
4. If it cannot be charged using a wired charger, if conditions permit, try replacing the battery or using a universal charger. If other chargers can charge the battery, your in-line charger may have poor contact and it is recommended to replace it.
5. If the phone can be turned on and used normally, it is recommended to backup the phone data (such as contacts, media files, etc.) and restore the phone to factory settings. phone. If the problem persists after following the above methods, please take your purchase invoice, repair card and machine to the service center for inspection.
The battery cannot be charged, what should I do?Ansons from netizens: The ammeter indicator returns too quickly while driving after starting, or the battery temperature is too high and the ammeter indicator is still at 10 5A. after riding for a long time above. Causes of failure: 1) Damaged battery. 2) There is an internal short circuit fault. 3) The active material of the plate falls off, making the capacity too small. 4) The plate is vulcanized or the negative plate is hardened. Fault Judgment and Troubleshooting: In case of battery charging failure, judgment should be made based on comprehensive analysis of the fault phenomenon and usage. 1) If the battery has been used for more than a year and the above phenomenon occurs, it is usually because the battery is exhausted and needs to be replaced with new parts. 2) If the battery temperature is high and the ammeter indicator is still above +5 A after along drive, you can use a high flow discharge meter to find out. If the measured voltage of a certain cell is less than 1.5V, it means that there is a short circuit fault in that single cell and it needs to be dismantled and repaired. 3) If the electrolyte is cloudy, it is usually caused by the active material falling on the plate and the battery should be replaced with a new one. 4) If the starter cranks once or twice and is obviously unable to restart, this means that the battery is "floating", mainly due to plate vulcanization or negative plate hardening, and a recovery charge must be carried out. get out on time.
What should I do if my cell phone battery has not been used for a long time and cannot be charged now?"yang_superman | Level 3
You can wrap the battery in plastic wrap and put it in the refrigeratorator. Leave it in the room for two days, take it out and let it dry naturally at normal temperature, then recharge it. I am speechless for the *** response above
Regardless of the method used, the best solution is to replace the lithium battery with a dead battery. The reason why the battery cannot be charged is due to the internal structure of the battery. The battery has been damaged by low voltage. This is not because the battery performance decreases the longer you use it.
As for the idea of freezing it, at least I've been working on lithium batteries for 8 years and have never heard of any principle behind it: the only likely explanation is that when frozen, the ion channels on the kit's electrodes are expanded to extend the lifespan. Only theservice life has been exceeded. However, this method is essential!
What should I do if the flashlight battery cannot be charged after being left for a long time?Check if there is any distilled water left. Generally speaking, the flashlight used for charging cannot run out of power. Otherwise, make it yourself, this kind of water steam will do, or snow and water will do.
What should I do if the battery of the electric pallet truck has no not been charged for a long time5-1. electric forklift batteries (electric storage forklifts also without exception) Before use, first unscrew the cap, remove the cap and seal the small hole to keep the small hole open. When the cooled electrolyte is added, its temperature should not be lower than 0°C or higher than 32°C. The electrolyte is prepared with sulfuric acid and distilled water. LSulfuric acid is made from special sulfuric acid for batteries.
Dry batteries cannot be charged.Do you have a multimeter? After discharging the battery and charging it for 20 minutes, measure the battery voltage. If it is higher than 14V, it means your battery is broken.
What should I do if the cell phone battery has been left for a long time and cannot be charged?The only option is to replace the battery. First make sure the phone body is still usable, otherwise it will fail. There is no need to replace the electrical panel.
The rechargeable battery has not been used for a long time. What should I do if it can't be charged?This means that the battery itself is exhausted. you have to charge it. Do you know how many V the battery has? For example, if the voltage is 3.7V, find a good battery around 5V, connect the positive pole to the polepositive pole of the old battery and the negative pole to the negative pole. After a few minutes, the tension of the old one. the battery will increase again, then it can be charged.