Just connect the power to the transceiver charger. After connecting the power, place the transceiver on the charger to start charging. The indicator light will be red when charging, and it will be on. green when the indicator light is on. When fully charged, simply remove the radio from the charger.
Most walkie-talkie batteries on the market now use high-efficiency and environmentally friendly lithium batteries, but some also use nickel-metal hydride batteries and nickel-cadmium batteries . These three types of battery charging precautions are different and therefore should be clearly distinguished.
1. You must use the original charger, because non-original chargers will damage the battery;
2. Chargers for different types of batteries (such as nickel-metal hydride batteries and Li-ion batteriesithium) cannot be mixed, otherwise the battery will be damaged;
3. When charging with the battery, the walkie talkie must be turned off;
4. leave the walkie talkie or battery on the charging stand, as this will seriously damage the battery life.
Detailed information:
Lithium Battery: Lithium battery does not need to be activated and there is no statement regarding its activation. You should only charge it when the power is less than 10% or. the walkie talkie displays a low battery prompt. It takes about 15 minutes to fully charge the battery, ensuring battery health is protected.
Ni-MH Battery: This battery must be activated. It must be charged for more than 12 hours the first three times toenable. Although the memory effect of nickel-metal hydride batteries is low, it is still recommended to try to charge them after each use and fully charge them at the same time. Don't charge them for a while, use them for a while and. then recharge it. This way the battery will last longer.
Nickel-cadmium battery: This battery must be activated. It must be charged for more than 12 hours the first three times to activate. Before charging each time, you must ensure that the battery of the walkie-talkie is completely clean (that is, it cannot transmit normally when you press the PTT button of the walkie-talkie). Otherwise, the walkie talkie battery will have memory. Battery life is significantly reduced.
If possible, go to a larger electronic marketplace that specializes in selling electronic components. NOTremove the model number of the movie and go to it directly. Additionally, you can find a second-hand or second-hand lithium battery of the same model and disassemble it yourself to replace it. In short, unless you know exactly the model of the chip that can be replaced, it is recommended to use components of the same model as a safety measure.