How to maintain OPPO batteries

Introduction How to maintain OPPO battery? If you are using OPPO mobile phone, learn the following battery maintenance tips, which can effectively help you save the power consumption of your mobile phone: 1. Keep it correct.

How to maintain OPPO batteries

If you are using an OPPO mobile phone, the following battery care tips can effectively help you save the power consumption of your mobile phone:

1. Adopt good battery habits load

1. Use original chargers for charging

Non-original chargers may be incompatible with the mobile phone charging protocol and may easily damage the battery electrodes, causing swelling of the battery. battery.

2. Stop charging when the phone indicates it is full.

The lithium battery used in OPPO mobile phones has been activated when leaving the factory. and the first charging time does not need to be too long.

3. Start charging when the “low battery” prompt appears

Keeping the battery power between 20% and 80% is more conducive to extending battery lifeie the battery. .

4. Try to avoid using the mobile phone while charging

Using the mobile phone while charging will increase the temperature of the mobile phone, and temperature charging will accelerate the aging of the battery .

2. Pay attention to the appropriate usage environment

1. Use your mobile phone at an appropriate temperature

Recommended room temperature. for mobile phone use is -10℃ to 35℃.

When the temperature is too low, battery activity is reduced and available capacity is reduced, resulting in increased power and becomes less durable.

When the temperature is too high, the internal temperature of the battery will continue to heat up and the lost lithium-ion battery capacity will accelerate.

2. Using a mobile phone in an environmentstrong signal

When using a mobile phone in a weak signal area, the mobile phone will search for and transmit signals, increasing additional communication power consumption.

3. Pay attention to basic power saving settings

1. Adjust the screen brightness

How to use: Settings>Display. and Brightness > Automatically adjust brightness

2. Reduce screen refresh rate

How to use: Settings>Display & Brightness>More>Screen refresh rate>Standard. refresh rate

3. Reduce screen time

How to operate: Settings>Display & Brightness>Automatically pause screen>15s

4. Deactivate functions that are not yet used and activate them immediately

Operation method : Pull down the notification bar and turn off Bluetooth, NFC, GPS and other buttons

5, Enable power saving mode/ultra power saving mode

How to use: Settings > Battery > Power saving mode/ultra mode power saving mode

4. Respect the correct and reasonable use of the software

1. Clean temporarily unused background programs

Operation method:

(1) Virtual keys are not activated: Swipe up from the bottom of the screen and pause for 1 second, click "Clear"

(2) Virtual keys are enabled: click the multitasking key "≡" at the bottom of the screen, click “Delete” ”

2. Disable software autostart

How to work: Settings > Application management > Autostart management, disable autostartAllow autostart for apps that don't require autostart

3 Turn off notifications from unnecessary apps.

How to operate: Settings > Notifications and status bar > Notification management, turn off apps that don't want to show notifications p>

4 Uninstall software which consume money. a lot of power and is not commonly used

How to operate: Settings > Battery > Power consumption details, check the power consumption of each software and search According the software icon, long press the icon to uninstall

Check the battery life of OPPO mobile phone

If you are using an OPPO mobile phone (ColorOS system), learn the following Battery life Tips on battery life maintenance can becan effectively help you save power consumption of your mobile phone:

1. Follow good charging habits

1. Use the original charger to charge. /p>

No The original charger may be incompatible with the mobile phone charging protocol and may easily damage the battery electrodes, causing the battery to bulge.

2. Stop charging when the phone tells you it is fully charged.

The lithium battery used in OPPO mobile phones has been activated when leaving the factory and the first charging time does not work not. it must be too long.

3. Start charging when the “low battery” prompt appears.

Keeping the battery power between 20% and 80% is more conducive to extending battery life.

4. Try to avoid using the mobile phone while charging

Using the phonemobile phone while charging will increase the temperature of the mobile phone. Charging at high temperatures will accelerate battery aging.

2. Pay attention to the appropriate usage environment

1. Use the mobile phone at an appropriate temperature

The recommended ambient temperature for using the mobile phone is -10℃ to 35℃.

When the temperature is too low, battery activity is reduced and available capacity is reduced, resulting in increased power and becomes less durable.

When the temperature is too high, the internal temperature of the battery will continue to heat up and the lost lithium-ion battery capacity will accelerate.

2. Use a mobile phone in a strong signal environment

When you use a mobile phone in a weak signal area, the mobile phone will frequently search and transmit signals, which haswill increase the additional power consumption of communication.

3. Pay attention to the basic power saving settings

1. Adjust the screen brightness

How to use: Adjustment > Display & Brightness > Automatically adjust brightness

2. Reduce screen refresh rate

How to use: Settings > Display & brightness > More > Screen refresh rate > Standard refresh rate

p>

3. Reduce screen time

How to use: Settings>Display & Brightness>Automatically pause screen>15s

4. functions that are not currently used and use them immediately. Instant on

Working method: pull down the notification bar, turn off Bluetooth, NFC, GPS and other buttons

5. Enable power saving mode/super power saving mode

Operation method: Settings > Batterie > Power Saving Mode/Super Power Saving Mode

4. Respect the correct and reasonable use of the software. /p>

1. Clean temporarily unused background programs

>

Operation method:

(1) Virtual keys are not enabled: slide up from the bottom of the screen and pause for 1 second, click "Clear"

(2) Virtual keys are enabled: Click the multitasking key "≡" at the bottom of the screen, click "Clear"

2. Disable software autostart

Operation method: Settings>Application management>Autostart management, close if you don't need Autostart permissions for autostart applications

3. Turn off unnecessary app notifications

How to work: Settings > Notifications & status bar > Notification management, turn offapplications that do not want to display notifications

p>

4. Uninstall software that consumes a lot of power and is not commonly used

How to operate: Settings > Battery > Power Consumption Details, check the power consumption of each software, find the icon of the corresponding software, and press and hold the uninstall icon

If the above does not solve your problem, it is recommended to take the corresponding purchase receipt to the official OPPO service center for inspection and treatment.

What should I do if OPPO cell phone battery is not durable?

How long does a cell phone battery last:

The battery life of a cell phone is approximately 500 times that of a normal charging and discharging. The longer the charging interval, the longer the battery life of a TVmobile phone is long. longer its lifespan. If you charge it every other day, a battery can last about 2.7 years.

Notes: Battery life depends on the number of repeated charges and discharges. Therefore, overcharging and overdischarging the battery should be avoided as much as possible, as this will shorten the battery life.

Most current smartphones have built-in batteries that are not removable. Battery life is therefore an important factor in the lifespan of smartphones. How to maintain cell phone batteries? ? Now I will teach you some tips. Pay attention and let your phone use longer~

OPPO mobile phones are equipped with lithium batteries, which have been activated when leaving the factory. the time doesn't need to be too long. It indicates that it will be charged once it is fully charged.loaded. It is recommended to warn the user on your mobile phone when the battery is low, connect it to the original charger and do not use it while charging.

Here are some tips for using cell phone batteries:

1. Do not over-discharge and charge as soon as the phone displays “low battery”.

2. Don't overload. If the phone is full, you need to unplug the charger.

3. If the battery is not used for a long time, it should be charged to 60%, stored separately in a cool, dry place and recharged every 4 or 5 months.

If your cell phone battery is damaged/aging, in order to turn it back on and use it normally, it is recommended to bring your purchase invoice, warranty card and cell phone to the local OPPO service center for testing. Under the warranty, the battery can be replaced free of charge.leakage after inspection and confirmation by OPPO customer service center.

Warm reminder:

OPPO original batteries and other spare parts can only be replaced by OPPO official customer service center and are not sold to the outside world.

This answer applies to all OPPO models.

If you are using OPPO/OnePlus (ColorOS system) mobile phone, learning the following battery maintenance tips can effectively help you save power consumption of your mobile phone:

1. Maintain good charging habits

1. Use original chargers to charge

Non-original chargers may be incompatible with the charging protocol of the mobile phone and may easily damage the battery electrodes, causing the battery to deteriorate. swell.

2. Stop charging when the phone tells you it is cfully charged.

The lithium battery used in OPPO mobile phones has been activated when leaving the factory and the first charging time does not work. it must be too long.

3. Start charging when the “low battery” prompt appears.

Keeping the battery power between 20% and 80% is more conducive to extending battery life.

4. Try to avoid using the mobile phone while charging

Using the mobile phone while charging will increase the temperature of the mobile phone, and charging at high temperatures will accelerate the aging of the battery.

2. Pay attention to the appropriate usage environment

1. Use the mobile phone at an appropriate temperature

The recommended ambient temperature for using the mobile phone is -10℃ to 35℃.

When the temperature is too low, battery activity is reduced andthe available capacity is reduced, resulting in an increase in power and becoming less durable.

When the temperature is too high, the internal temperature of the battery will continue to heat up and the lost lithium-ion battery capacity will accelerate.

2. Use a mobile phone in a strong signal environment

When using a mobile phone in a weak signal area, the mobile phone will frequently search and transmit signals, which will increase the additional power consumption of Communication.

3. Pay attention to the basic power saving settings

1. Adjust screen brightness

How to use: Settings > Display & brightness > Automatically adjust brightness< /p>

2. Reduce the screen refresh rate

How to use: Settings>Display & brightness>More>Screen refresh rate>Standard refresh rate

3.Reduce screen time

How to use: Settings>Display & brightness>Auto screen break>15s

4 Turn off functions that are not not used and turn them on immediately

p>< p>How to operate: pull down the notification bar, turn off Bluetooth, NFC, GPS and other buttons

5. Turn on Power Saving Mode/Super Power Saving Mode

How to operate: Settings > Battery > Power Saving Mode/Super Power Saving Mode

4. Respect the correct and reasonable use of the software

1. Clean up background programs that are temporarily running. unused

Operation method:

(1) Virtual keys are not enabled: Swipe up from the bottom of the screen and pause for 1 second, then click "Clear"

(2) Virtual keys are enabled: click the multitasking key "≡"at the bottom of the screen, click "Clear"

2 Disable automatic software startup

.

Operation method: Settings > Application management > Autostart management, disable autostart permission for apps that do not require autostart

3 Disable unnecessary app notifications< /p>

How to work: Settings > Notifications and status bar > Notification management, turn off apps you don't want to show notifications for.

4. Uninstallation consumes energy. A large amount of software that is not commonly used.

How to operate: Settings > Battery > Power consumption details, check the power consumption of each software, find the corresponding software icon, long press the icon to uninstall

  • Popular Focus
  • Where is the cheapest battery wholesale?

    Where is the cheapest battery wholesale in Tangxia, Sanyuanli, Baiyun District? There is an enterprise specializing in the independent production of electric vehicles in Tangxia, Sanyuanli, Baiyun District, Baiyun Sanyuanli Avenue, Baiyun Sanyuanli Street
    08-02
  • Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. How to reduce it to 4.8V/4.4A?

    Four 3.7V lithium batteries in series and parallel produce 7.4V/4.4A. I personally think it is impossible to reduce it to 4.8V/4.4A. Because the discharge platform of lithium batteries is generally set
    08-10
  • What are the materials of the negative electrodes of lithium batteries?

    What are the materials of the negative electrodes of lithium batteries? The main commercial applications of lithium batteries include graphite, which is a sheet of copper used to guide current and which does not react. another safe
    08-02
  • The difference between 18500 and 26500 batteries

    What is the difference between 18500 and 26500 batteries? The answer above is 18650. The person asking the question should ask what is the difference between 18505 and 26500 batteries. In the case of Fuant ER1
    08-02
  • What does 3.7V 80mAh written on a lithium battery mean?

    What does 3.7V 80mAh written on a lithium battery mean? 3.7 V, 80 mA = 0.08 A, H means 1 hour, or 3600 seconds. Taken together, it is
    08-02
  • How long does a lithium battery (cell phone battery) last?

    How long does a lithium battery (cell phone battery) last? The lifespan of mobile phone batteries, under normal conditions of use and without serious impact, the lifespan set by the manufacturer must be 5 years.
    08-02
  • Will lithium batteries explode when charging?

    Will lithium batteries explode when charged? Will lithium batteries explode when charged? Lithium battery explosions usually occur during the charging process, because the negative electrode material of lithium batteries is graphite or other carbon materi
    08-02
  • Parameters of lgdas31865 lithium battery

    Parameters of lgdas31865 lithium battery The parameters of lgdas31865 lithium battery are as follows: LGDAS31865 is a model 18650 lithium battery with a capacity of
    08-02
  • What are the main components of lithium battery electrolyte?

    What are the main components of lithium battery electrolyte? The composition of lithium battery electrolyte is shown below. 1. Ethylene carbonate: molecular formula C3H4O3. Colorless transparent liquid (>35℃), room temperature
    08-02
  • Who are the lithium battery manufacturers in Shandong?

    What are the lithium battery manufacturers in Shandong? Shandong Shengyang Power Supply Co., Ltd. and Shandong Weineng Environmental Protection Power Technology Co., Ltd. 1. Shandong Shengyang Power Supply Co., Ltd. is located in Shengyang, Qufu City.
    08-02
  • Types of drone batteries available in 2024

    Part 1. Types of drone batteries available in 2024In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in
    07-30
  • How long does it take to charge 26650 battery?

    How long does it take to charge a 26650 battery? The charging time for a 26650 battery is generally between 3 and 6 hours, but the precise time depends on the power of the charger and the capacity of the battery. in general
    08-02
  • For what?Sure, here's an article based on the phrase "For what?

    The simple yet profound question, "For what?" often serves as a gateway to deeper reflections on purpose and intention. It is a query that invites us to delve into the reasons behind actions, decisions, and circumstances that shape our lives and the wor
    08-02
  • Choosing the Right Cart Battery

    This comprehensive guide will walk you through everything you need about cart batteries, from understanding different types to making an informed purchase decision.
    08-02
  • 30mAh~500mAh 3.7 V Li-ion Battery

    Welcome to Ufine's collection of 3.7V lithium-ion batteries ranging from 30mAh to 500mAh. Explore a diverse range of compact and lightweight batteries suitable for various electronic devices,
    08-02
  • Here are 10 essential facts about drone batteries for 2024.

    10 Key Facts About Drone Battery for 2024 In 2024, drone batteries have advanced significantly, offering a range of options to cater to various needs in the consumer, commercial, and industrial sectors. Below are the primary types of drone batteries avai
    08-02
  • Could you please explain the difference among IMR, ICR, INR, and IFR 18650 batteries?

    What is the Difference Between IMR, ICR, INR, and IFR 18650 Battery?In 18650 batteries, discerning the differences among IMR, ICR, INR, and IFR types is fundamental for tailored and efficient battery usage. These distinct
    08-02
  • Safety considerations for cart batteries

    Selecting the ideal cart battery is crucial for ensuring optimal performance and longevity of your electric vehicle or vaping device. This comprehensive guide w
    08-01