Packaging requirements are those for packaging conforming to UN specifications; the equipment must be fixed to prevent the battery from moving inside the packaging, and the packaging must be so as to prevent the battery from accidentally starting during transportation.
It must be packaged in UN specification packaging stipulated in the Dangerous Goods Regulations of the DGR in accordance with the applicable packaging instructions, and the corresponding number must be fully displayed on the packaging. Packaged in conformity, except that it is marked with the applicable proper shipping name and UN number. Category 9 hazard labels must also be affixed.
The device must be secured to prevent movement of the battery in the packaging and packaged in a manner to prevent accidental activation of the battery during transport. The outer packaging must be waterproof, or must bewaterproof through the use of an interior liner, unless the equipment itself is constructed to be waterproof. Lithium batteries should be loaded on pallets to avoid strong vibrations during transportation. Each vertical and horizontal edge of the pallet must be protected by corner protections.
Detailed information:
Relevant requirements for the transport of lithium-ion batteries:
1. When the battery is charged, lithium ions are generated on the positive electrode. drums. The generated lithium ions move towards the negative electrode through the electrolyte. The carbon used as a negative electrode has a layered structure with numerous micropores. The lithium ions that reach the negative electrode are integrated into the micropores of the carbon layer. The more lithium ions there are, the greater the capacityThe load is high.
2. The discharge current should not be too large. Excessive current will cause internal heating of the battery and may cause permanent damage.
Baidu Encyclopedia - Lithium Ion Battery Transportation
What is the best company to ship lithium batteries to New Delhi, India by air< /h3>
< p>1) Lithium batteries and lithium battery packs are classified as Class 9 dangerous goods
2) All lithium batteries (packs) must pass the UN38.3 test
3) Certain Class 9 lithium batteries of dangerous goods are transported Provides exceptions
4) Strict restrictions on transport samples
5) Restrictions on daily use lithium batteries carried by passengers
6) It is prohibited to transport all defective or damaged batteries.
If batteriesLithium batteries are included in the product, as long as the power does not exceed 100W, you can choose FEDEX service from Benyi International Freight. , which takes about 3-5 days. If it is pure lithium battery, you can also use Benyi International Freight's battery channel. The relevant requirements are as follows:
① Outer box packaging: The outer box packaging should be strong and clean. bags, sealed documents and cannot be cut are allowed. Remove the ears from the cardboard;
② Weight limit: a single pure lithium battery in the outer box cannot exceed 10.0KG/carton, dry batteries are not limited. UPS-HKD does not accept dry batteries
③Inner box packaging: each battery needs to be packaged independently, power below 2.7W: 2.5kg/inner box (box), 10 kg/box; 2pcs/inner box for one wellpower greater than 2.7 W; including cell phone batteries.
③Inner box packaging: A fireproof label should be attached to the inner box. Flame-retardant label requirements: Non-folding, standard size: 120*110MM, small flame-retardant label: 74MM*105MM
④ Outer box markings: The outer box of the goods does not must not have dangerous goods markings (aeronautical markings, class 1 to 9 hazard markings).
⑥ External battery label: There is no description on the outer surface of the battery or battery, and there is no battery power label. If it is an unknown battery, we will not accept it.
⑦Power requirements: lithium battery power cannot exceed 100W (AH current*V voltage, 1ah=1000mah); dry batteries have no power requirementstion and a single unit cannot exceed 10KG. Oversized batteries will not be accepted;
⑧ Dry batteries and lithium batteries cannot be mixed in one box
⑨ Document requirements: waybill, list and invoice must indicate the battery category (lithium battery, dry cell); , type (PI965-PI970), power (current * voltage) For details, please refer to http://www.bee56.com/news/xinwen/589.html for more detailed battery transportation instructions lithium.