The smartphone has a built-in lithium battery, which does not need to be activated or charged and discharged several times. Just charge the new phone to full capacity for the first time.
Precautions for daily use of mobile phone batteries:
1. It is recommended to use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standards. .
2. In theory, keeping battery power in an average range (around 50%, e.g. 30% to 70%) for a long time is more conducive to extending battery life, so:
< p>Mobile phones It is recommended to unplug it in time after it is fully charged. Leaving the phone in a high power state for a long time will cause the battery to wear out faster.Try to avoid waiting for the battery to chargeor less than 20% before charging the battery. Excessive discharge will cause the battery to wear out more quickly. It can be recharged over time to extend battery life.
It is recommended not to leave the phone idle for a long time and to fully charge the battery from time to time. If the mobile phone is not used or charged for a long time, the battery will be completely consumed, resulting in abnormal charging or charging failure.
3. If the battery temperature is too high or too low, it will affect the battery life of the mobile phone. Therefore:
Try to avoid placing the mobile phone in a damp place. environment with low or high temperatures or large temperature differences.
Try to avoid using your phone while charging. Using a cell phone whileCharging can easily cause the phone to heat up, and discharging it for a long time at high temperatures will worsen battery loss.
The Huawei P10 series is available in 5.2-inch and 5.5-inch versions. The Huawei P10 is expected to feature a 5.2-inch direct display, while the Huawei P10 Plus will use a 5.5-inch one. 2 inch curved screen design. This is similar to the one released in late 2016. Like the Mate9, the standard Mate9 model uses a straight screen design, while the Mate9 Pro uses a curved screen design. The screen difference should be the biggest difference between the P10 and P10 Plus. In terms of fingerprint recognition, the P10 has a front fingerprint design, while the P10 Plus has a rear fingerprint design.
The P10 and P10 Plus processors must be slightly modified Kirin 960 or Kirin 965. In termsphotography, it is also expected to be equipped with two Leica cameras, and the aperture will be increased to F2.0. It will most likely be upgraded to a second generation Leica lens, or laser focus and LED flash will be integrated. .
In terms of battery life, the P10 series will support 40W fast charging technology and lithium batteries produced by Sunwanda. As for the specific release time, Yu Chengdong confirmed that it will be released this spring.