|
SIST EN ISO/ASTM 52902:2019
01-december-2019
Aditivna proizvodnja - Preskusni artefakti - Geometrijske zmogljivosti aditivnih
proizvodnih sistemov (ISO/ASTM 52902:2019)
Additive manufacturing - Test artifacts - Geometric capability assessment of additive
manufacturing systems (ISO/ASTM 52902:2019)
Additive Fertigung - Testkörper - Allgemeine Leitlinie für die Bewertung der
geometrischen Leistung additiver Fertigungssysteme (AM-Systeme) (ISO/ASTM
52902:2019)
Fabrication additive - Pièces types d'essai - Ligne directrice standard pour l'évaluation de
la capacité géométrique des systèmes de fabrication additive (ISO/ASTM 52902:2019)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52902:2019
ICS:
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO/ASTM 52902:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/ASTM 52902:2019
---------------------- Page: 2 ----------------------
SIST EN ISO/ASTM 52902:2019
EN ISO/ASTM 52902
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 25.030
English Version
Additive manufacturing - Test artifacts - Geometric
capability assessment of additive manufacturing systems
(ISO/ASTM 52902:2019)
Fabrication additive - Pièces types d'essai - Évaluation Additive Fertigung - Testkörper - Allgemeine Leitlinie
de la capacité géométrique des systèmes de fabrication für die Bewertung der geometrischen Leistung
additive (ISO/ASTM 52902:2019) additiver Fertigungssysteme (AM-Systeme)
(ISO/ASTM 52902:2019)
This European Standard was approved by CEN on 7 July 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52902:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/ASTM 52902:2019
EN ISO/ASTM 52902:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/ASTM 52902:2019
EN ISO/ASTM 52902:2019 (E)
European foreword
This document (EN ISO/ASTM 52902:2019) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/ASTM 52902:2019 has been approved by CEN as EN ISO/ASTM 52902:2019 without
any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO/ASTM
...