SIST EN 55014-1:2017/A11:2020

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

SIST EN 55014-1:2017/A11:2020

Name:SIST EN 55014-1:2017/A11:2020   Standard name:Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
Standard number:SIST EN 55014-1:2017/A11:2020   language:English language
Release Date:12-Mar-2020   technical committee:EMC - Electromagnetic compatibility
Drafting committee:   ICS number:33.100.10 - Emission
SLOVENSKI STANDARD
SIST EN 55014-1:2017/A11:2020
01-april-2020
Elektromagnetna združljivost - Zahteve za (električne) gospodinjske aparate,
električna ročna orodja in podobne aparate - 1. del: Oddajanje - Dopolnilo A11
Electromagnetic compatibility - Requirements for household appliances, electric tools
and similar apparatus - Part 1: Emission
Elektromagnetische Verträglichkeit - Anforderungen an Haushaltgeräte,
Elektrowerkzeuge und ähnliche Elektrogeräte - Teil 1: Störaussendung
Compatibilité électromagnétique - Exigences pour les appareils électrodomestiques,
outillages électriques et appareils analogues - Partie 1: Emission
Ta slovenski standard je istoveten z: EN 55014-1:2017/A11:2020
ICS:
33.100.10 Emisija Emission
SIST EN 55014-1:2017/A11:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 55014-1:2017/A11:2020

---------------------- Page: 2 ----------------------
SIST EN 55014-1:2017/A11:2020


EUROPEAN STANDARD EN 55014-1:2017/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2020
ICS 33.100.10

English Version
Electromagnetic compatibility - Requirements for household
appliances, electric tools and similar apparatus - Part 1:
Emission
Compatibilité électromagnétique - Exigences pour les Elektromagnetische Verträglichkeit - Anforderungen an
appareils électrodomestiques, outillages électriques et Haushaltgeräte, Elektrowerkzeuge und ähnliche
appareils analogues - Partie 1: Emission Elektrogeräte - Teil 1: Störaussendung
This amendment A11 modifies the European Standard EN 55014-1:2017; it was approved by CENELEC on 2019-11-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 55014-1:2017/A11:2020 E

---------------------- Page: 3 ----------------------
SIST EN 55014-1:2017/A11:2020
EN 55014-1:2017/A11:2020 (E)
European foreword
This document (EN 55014-1:2017/A11:2020) has been prepared by CLC/TC 210 "Electromagnetic
Compatibility (EMC)".
The following dates are fixed:
• latest date by which this document has (dop) 2020-11-27
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2022-11-27
standards conflicting with this document
have to be withdrawn
This document amends EN 55014-1:2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
2

---------------------- Page: 4 ----------------------
SIST EN 55014-1:2017/A11:2020
EN 55014-1:2017/A11:2020 (E)
1 Addition of Annex ZZ, "Relationship between this European standard and
the essential requirements of Directive 2014/30/EU [2014 OJ L96] aimed to
be covered "
Add the following Annex ZZ:
"
Annex ZZ
(informative)

Relationship between this European standard and the essential requirements
of Directive 2014/30/EU [2014 OJ L96] aimed to be covered

This European standard has been prepared under the European Commission standardisation request
1
C(2016) 7641 final of 30.11.2016 , ('M/552'), as regards harmonised standards in support of Directi
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27