SIST EN 4359:2009

Aerospace series - Six lobe recess - Drivers - Technical specification

SIST EN 4359:2009

Name:SIST EN 4359:2009   Standard name:Aerospace series - Six lobe recess - Drivers - Technical specification
Standard number:SIST EN 4359:2009   language:English language
Release Date:31-Mar-2009   technical committee:I13 - Imaginarni 13
Drafting committee:   ICS number:49.030.99 - Other fasteners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VSHFLILNDFLMDLuft- und Raumfahrt - Sechs-Bogenzahn-Innenantrieb - Schraubendrehereinsätze - Technische LieferbedingungenSérie aérospatiale - Empreinte six lobes - Embouts de tournevis - Spécification techniqueAerospace series - Six lobe recess - Drivers - Technical specification49.030.99Drugi vezni elementiOther fastenersICS:Ta slovenski standard je istoveten z:EN 4359:2006SIST EN 4359:2009en,de01-maj-2009SIST EN 4359:2009SLOVENSKI
STANDARD



SIST EN 4359:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4359December 2006ICS 49.030.99 English VersionAerospace series - Six lobe recess - Drivers - TechnicalspecificationSérie aérospatiale - Empreinte six lobes - Embouts detournevis - Spécification techniqueLuft- und Raumfahrt - Sechs-Bogenzahn, Innenantrieb -Schraubendrehereinsätze - Technische LieferbedingungenThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4359:2006: ESIST EN 4359:2009



EN 4359:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Performance.5 6 Quality assurance.6 7 Qualification and acceptance procedures.6 8 Test methods.6 9 Marking/packing.7
SIST EN 4359:2009



EN 4359:2006 (E) 3 Foreword This document (EN 4359:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4359:2009



EN 4359:2006 (E) 4 1 Scope This standard specifies the characteristics, qualification and acceptance requirements for drivers for installing and removing screws and bolts having six lobe recess internal drive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6508-1, Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T). EN 2424, Aerospace series — Marking of aerospace products. EN 3911, Aerospace series — Six lobe recess — Geometrical definition. 1) EN 4358, Aerospace series — Six lobe recess — Drivers, double ended, 90°. EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace standard parts. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 batch consists of drivers of the same types and of the same materials defined by the same standard 4 Required characteristics 4.1 General Recess in accordance with EN 3911. Dimensions and tolerances are in millimetres. 4.2 Material – Hardness – Surface condition – Surface coating – Dimensions and tolerances 4.2.1 Material The material quality is left at the manufacturer's option as specified in the product standard. However, materials used shall be either rolled, drawn or forged steel with chemical composition, and ascertain adequate strength composition and good impact characteristics.
1) Published as ASD Prestandard at t
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27