|
SIST EN 3660-004:2019+AC:2019
01-julij-2019
Nadomešča:
SIST EN 3660-004:2019
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
004. del: Kabelska spojka, tip A, ravna, netesnjena, z razbremenilno sponko -
Standard za proizvod (vključno s popravkom AC)
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain
relief - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 004: Endgehäuse, Bauform A, gerade Ausführung, nicht
abgedichtet, mit Zugentlastungsklemme - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 004 : Raccord droit non étanche type A avec brides
serre-câbles - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-004:2018+AC:2019
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3660-004:2019+AC:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3660-004:2019+AC:2019
---------------------- Page: 2 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-004:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 004:
Cable outlet, style A, straight, unsealed with clamp strain
relief - Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 004:
optiques - Partie 004 : Raccord droit non étanche type Endgehäuse, Bauform A, gerade Ausführung, nicht
A avec brides serre-câbles - Norme de produit abgedichtet, mit Zugentlastungsklemme -
Produktnorm
This European Standard was approved by CEN on 11 June 2018 and includes Corrigendum 1 issued by CEN on 24 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-004:2018+AC:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-004:2019+AC:2019
EN 3660-004:2018+AC:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 5
5 Designation. 12
6 Marking .
...