SIST EN 61755-1:2006

Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance

SIST EN 61755-1:2006

Name:SIST EN 61755-1:2006   Standard name:Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance
Standard number:SIST EN 61755-1:2006   language:English language
Release Date:30-Jun-2006   technical committee:MOC - Mobile Communications
Drafting committee:   ICS number:33.180.20 - Fibre optic interconnecting devices
SLOVENSKI SIST EN 61755-1:2006

STANDARD
julij 2006
Optični vmesniki konektorja optičnih vlaken – 1. del: Optični vmesniki za
enorodovna vlakna z nepremaknjeno disperzijo – Splošno in napotek (IEC
61755-1:2005)
Fibre optic connector optical interfaces – Part 1: Optical interfaces for single mode
non-dispersion shifted fibres – General and guidance (IEC 61755-1:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61755-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61755-1

NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic connector optical interfaces
Part 1: Optical interfaces for single mode non-dispersion shifted fibres -
General and guidance
(IEC 61755-1:2005)


Interfaces optiques avec connecteurs Optische Schnittstellen
pour fibres optiques von Lichtwellenleiter-Steckverbindern
Partie 1: Interfaces optiques pour fibres Teil 1: Optische Schnittstellen
monomodales à dispersion non décalée - von nicht-dispersionsverschobenen
Généralités et lignes directrices Einmodenfasern -
(CEI 61755-1:2005) Allgemeines und Leitfaden
(IEC 61755-1:2005)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-1:2006 E

---------------------- Page: 2 ----------------------

EN 61755-1:2006 - 2 -

Foreword
The text of document 86B/2217/FDIS, future edition 1 of IEC 61755-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61755-1 on 2006-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 61755-1:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61755-1
INTERNATIONAL


Première édition
STANDARD

First edition

2005-12


Interfaces optiques avec connecteurs
pour fibres optiques –
Partie 1:
Interfaces optiques pour fibres monomodales
à dispersion non décalée – Généralités et
lignes directrices

Fibre optic connector optical interfaces –
Part 1:
Optical interfaces for single mode
non-dispersion shifted fibres –
General and guidance
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
Int
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27