|
STANDARD
SIST EN 13232-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13232-1August 2003ICS 01.040.45; 45.080English versionRailway applications - Track - Switches and crossings - Part 1:DefinitionsApplications ferroviaires - Voie - Appareils de voie - Partie1: DéfinitionsBahnanwendungen - Oberbau - Weichen und Kreuzungen -Teil 1: DefinitionenThis European Standard was approved by CEN on 17 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13232-1:2003 ESIST EN 13232-1:2004
EN 13232-1:2003 (E)2ContentsPageForeword.31Scope.42General definitions.43Definitions of classification terms.94Definitions of terms in turnouts and diamonds.125Definitions of terms in layouts.206Definitions of constituent parts of switch and crossing work.247Definitions of geometry terms for switches and crossings.348Movement and retention of switches and crossings with moveable parts.439Kinematics and dynamics.4510Documents.47Bibliography.52SIST EN 13232-1:2004
EN 13232-1:2003 (E)3ForewordThis document (EN 13232-1:2003) has been prepared by Technical Committee CEN /TC 256, "Railwayapplications", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby February 2004.This series of standards “Railway Applications – Track – Switches and Crossings” covers the design and quality ofswitches and crossings in flat bottomed rail. The list of Parts is as follows :¾ Part 1 : Definitions¾ Part 2 : Requirements for Geometric Design¾ Part 3 : Requirements for Wheel/Rail Interaction¾ Part 4 : Requirements for Actuation, Locking and Detection¾ Part 5 : Switches¾ Part 6 : Fixed common and obtuse crossings¾ Part 7 : Crossings with moveable parts¾ Part 8 : Expansion devices¾ Part 9 : LayoutsPart 1 contains termino
...