|
SIST-TS CEN/TS 15427-2-2:2021
01-marec-2021
Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in
karakteristike - Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 2-2: Properties and
Characteristics - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2:
Eigenschaften und Merkmale - Behandlung der Schienenoberfläche
Applications ferroviaires - Gestion de la friction rail/roue - Partie 2-2 : Propriétés et
caractéristiques - Matériaux de la surface du rail
Ta slovenski standard je istoveten z: CEN/TS 15427-2-2:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
SIST-TS CEN/TS 15427-2-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-2-2:2021
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-2-2:2021
CEN/TS 15427-2-2
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
January 2021
TECHNISCHE SPEZIFIKATION
ICS 45.080; 45.120
English Version
Railway applications - Wheel/Rail friction management -
Part 2-2: Properties and Characteristics - Top of Rail
materials
Applications ferroviaires - Gestion des frottements Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 2-2 : Propriétés et caractéristiques - Rad und Schiene - Teil 2-2: Eigenschaften und
Lubrifiants de tête de rail Merkmale - Behandlung der Schienenoberfläche
This Technical Specification (CEN/TS) was approved by CEN on 23 November 2020 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-2-2:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-2-2:2021
CEN/TS 15427-2-2:2021
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Material requirements . 10
5 General requirements . 10
5.1 Introduction . 10
5.2 Product specification . 10
5.3 Technical file . 11
6 Control and monitoring of produc
...