|
SIST-TS CEN/TS 15427-1-3:2021
01-maj-2021
Železniške naprave - Trenje na stiku kolo-tirnica - 1-3. del: Oprema in uporaba -
Lepilni materiali
Railway applications - Wheel/Rail friction management - Part 1-3: Equipment and
Application - Adhesion materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 1-3:
Vorrichtungen und Anwendung - Kraftschlussmaterialien
Applications ferroviaries - Gestion du Frottement Roue/Rail - Parte 1-3: Équipement et
Application - Matériau d'Adhésion
Ta slovenski standard je istoveten z: CEN/TS 15427-1-3:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST-TS CEN/TS 15427-1-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-1-3:2021
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-1-3:2021
CEN/TS 15427-1-3
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
March 2021
TECHNISCHE SPEZIFIKATION
ICS 45.040
English Version
Railway applications - Wheel/Rail friction management -
Part 1-3: Equipment and Application - Adhesion materials
Applications ferroviaries - Gestion du Frottement Bahnanwendungen - Reibungsmanagement zwischen
Roue/Rail - Parte 1-3: Équipement et Application - Rad und Schiene - Teil 1-3: Vorrichtungen und
Matériau d'Adhésion Anwendung - Kraftschlussmaterialien
This Technical Specification (CEN/TS) was approved by CEN on 27 December 2020 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-1-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-1-3:2021
CEN/TS 15427-1-3:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General . 7
4.1 Purpose . 7
4.2 Application . 7
5 Requirements for trainborne equipment . 8
5.1 General . 8
5.2 Design of trainborne equipment . 8
5.3 Installation of trainborne equipmen
...