|
SIST EN ISO 10821:2005/A1:2009
01-maj-2009
Industrijski šivalni stroji - Varnostne zahteve za šivalne stroje, enote in sisteme -
Dopolnilo A1 (ISO 10821:2005/Amd 1:2009, popravljena različica 2009-08-01)
Industrial sewing machines - Safety requirements for sewing machines, units and
systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)
Industrienähmaschinen - Sicherheitsanforderungen an Nähmaschinen, Näheinheiten
und Nähanlagen - Änderung 1 (ISO 10821:2005/Amd 1:2009, korrigierte Fassung 2009-
08-01)
Machines à coudre industrielles - Exigences de sécurité pour machines à coudre, unités
et systèmes de couture - Amendement 1 (ISO 10821:2005/Amd 1:2009, Version
corrigée 2009-08-01)
Ta slovenski standard je istoveten z: EN ISO 10821:2005/A1:2009
ICS:
61.080 Šivalni stroji in druga oprema Sewing machines and other
za oblačilno industrijo equipment for the clothing
industry
SIST EN ISO 10821:2005/A1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10821:2005/A1:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 10821:2005/A1:2009
EUROPEAN STANDARD
EN ISO 10821:2005/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 61.080
English Version
Industrial sewing machines - Safety requirements for sewing
machines, units and systems - Amendment 1 (ISO
10821:2005/Amd 1:2009, Corrected version 2009-08-01)
Machines à coudre industrielles - Exigences de sécurité Industrienähmaschinen - Sicherheitsanforderungen an
pour machines à coudre, unités et systèmes de couture - Nähmaschinen, Näheinheiten und Nähanlagen - Änderung
Amendement 1 (ISO 10821:2005/Amd 1:2009, Version 1 (ISO 10821:2005/Amd 1:2009, korrigierte Fassung 2009-
corrigée 2009-08-01) 08-01)
This amendment A1 modifies the European Standard EN ISO 10821:2005; it was approved by CEN on 14 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10821:2005/A1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Contents Page
Foreword .3
Annex ZA (Informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (Informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Annex ZC (Informative) Corresponding International and European Standards for which
equivalents are not given in the text.6
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Foreword
The text of this Amendment EN ISO 10821:2005/Amd 1:2009, includes Corrected version 2009-08-01 to the
EN ISO 10821:2005 from Technical Committee ISO/TC 148 “Sewing machines” of the International
Organization for Standardization (ISO) has been taken over as an amendment to the European Standard.
This Amendment to the European Standard EN ISO 10821:2005 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and
conflicting national standards shall be withdrawn at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annexes ZA, B and C, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10821:2005/Amd 1:2009, includes Corrected version 2009-08-01 has been approved by CEN
as a EN ISO 10821:2005 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Annex ZA
(Informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive Machinery 98/37/EC, amended by 98/79/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Annex ZB
(Informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive Machinery 2006/42/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
5
---------------------- Page: 7 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Annex ZC
(Informative)
Corresponding International and European Standards for which
equivalents are not given in the text
At the time of publication of this International Standard, the editions of the following documents were valid.
Members of ISO and IEC maintain registers of currently valid International Standards.
Table ZC.1
International Standard European Standard
ISO 286 (all parts) —
ISO 639 —
ISO 2768 (all parts) —
ISO 2972:1979 —
ISO 3740:2000 EN ISO 3740:1999
ISO 3741:1999 EN ISO 3741:1999
ISO 3743-1:1994 EN ISO 3743-1:1995
ISO 3744:1994 EN ISO 3744:1995
ISO 3745:2003 EN ISO 3745:2003
ISO 3746:1995 EN ISO 3746:1995
ISO 3747:2000 EN ISO 3747:2000
ISO 3864-2:2004 —
ISO 4183:1995 —
ISO 4871:1996 EN ISO 4871:1996
ISO 4915:1991 —
SO 4916:1991 —
ISO 7574 (all parts) EN 27574 (all parts)
ISO 8239:1987 —
ISO/CIE 8995:2002 EN 12464:1998
ISO 9614-1:1993 EN ISO 9614-1:1995
ISO 9614-2:1996 EN ISO 9614-2:1996
ISO 11200:1995 EN ISO 11200:1995
ISO 11201:1995 EN ISO 11201:1995
ISO 11202:1995 EN ISO 11202:1995
ISO 11203:1995 EN ISO 11203:1995
ISO 11204:1995 EN ISO 11204:1995
ISO/TR 11688-1:1995 EN ISO/TR 11688-1:1998
ISO 12100-1:2003 EN ISO 12100-1:2003
6
---------------------- Page: 8 ----------------------
SIST EN ISO 10821:2005/A1:2009
EN ISO 10821:2005/A1:2009 (E)
Table ZC.1 (continued)
International Standard European Standard
ISO 12100-2:2003 EN ISO 12100-2:2003
ISO 13849-1:2006 EN ISO 13849-1:2006
ISO/DIS 13857:2006 prEN 13857:2007
ISO 13854:1996 EN 349:1993
IEC 60204-1 EN 60204-1
IEC 60204-31 EN 60204-31
IEC 60745-1:2006 EN 60745-1:2006
IEC 60825-1:2007 EN 60825-1:2007
— EN 563
...