|
et étanches pour sertissage sur conducteurs en cuivre,
température jusqu'à 200 °C - Norme de produitAerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3373-014:2009SIST EN 3373-014:2009en01-maj-2009SIST EN 3373-014:2009SLOVENSKI
STANDARD
SIST EN 3373-014:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3373-014
March 2009 ICS 49.060 English Version
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
Série aérospatiale - Cosses et prolongateurs pour sertissage sur conducteurs électriques - Partie 014: Prolongateurs isolés
et étanches pour sertissage sur conducteurs en cuivre,
température jusqu'à 200 °C - Norme de produit
Luft- und Raumfahrt - Kabelschuhe und Stossverbinder zum crimpen an elektrische Leitungen - Teil 014: Stossverbinder isoliert, abgedichtet, Crimpenversion Kupferleitungen, für Temperaturen bis 200 °C - Produktnorm This European Standard was approved by CEN on 30 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3373-014:2009: ESIST EN 3373-014:2009
EN 3373-014:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Characteristics .45Tests and requirements .66Designation .67Quality assurance .68Details of assembly tooling .69Marking .710Packaging .7 SIST EN 3373-014:2009
EN 3373-014:2009 (E) 3 Foreword This document (EN 3373-014:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September
...