|
SIST EN ISO 3691-4:2020
01-oktober-2020
Nadomešča:
SIST EN 1525:1999
Vozila za talni transport - Varnostne zahteve in preverjanje - 4. del: Vozila brez
voznika in njihovi sistemi (ISO 3691-4:2020)
Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial
trucks and their systems (ISO 3691-4:2020)
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 4:
Fahrerlose Flurförderzeuge und ihre Systeme (ISO 3691-4:2020)
Chariots de manutention - Exigences de sécurité et vérification - Partie 4: Chariots sans
conducteur et leurs systèmes (ISO 3691-4:2020)
Ta slovenski standard je istoveten z: EN ISO 3691-4:2020
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN ISO 3691-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3691-4:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 3691-4:2020
EN ISO 3691-4
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2020
EUROPÄISCHE NORM
ICS 53.060 Supersedes EN 1525:1997
English Version
Industrial trucks - Safety requirements and verification -
Part 4: Driverless industrial trucks and their systems (ISO
3691-4:2020)
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 4: Chariots sans conducteur et Anforderungen und Verifizierung - Teil 4: Fahrerlose
leurs systèmes (ISO 3691-4:2020) Flurförderzeuge und ihre Systeme (ISO 3691-4:2020)
This European Standard was approved by CEN on 11 January 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3691-4:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3691-4:2020
EN ISO 3691-4:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3691-4:2020
EN ISO 3691-4:2020 (E)
European foreword
This document (EN ISO 3691-4:2020) has been prepared by Technical Committee ISO/TC 110
"Industrial trucks" in collaboration with Technical Committee CEN/TC 150 “Industrial Trucks - Safety”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1525:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3691-4:2020 has been approved by CEN as EN ISO 3691-4:2020 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3691-4:2020
----------------------
...