SIST EN 15154-3:2009

Emergency safety showers - Part 3: Non plumbed-in body showers

SIST EN 15154-3:2009

Name:SIST EN 15154-3:2009   Standard name:Emergency safety showers - Part 3: Non plumbed-in body showers
Standard number:SIST EN 15154-3:2009   language:English language
Release Date:06-Apr-2009   technical committee:I13 - Imaginarni 13
Drafting committee:   ICS number:11.160 - First aid
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WHOHVDSicherheitsnotduschen - Teil 3: Körperduschen ohne WasseranschlussDouches de sécurité - Partie 3: Douches pour le corps non raccordées au réseau d'eauEmergency safety showers - Part 3: Non plumbed-in body showers71.040.10Kemijski laboratoriji. Laboratorijska opremaChemical laboratories. Laboratory equipment11.160First aidICS:Ta slovenski standard je istoveten z:EN 15154-3:2009SIST EN 15154-3:2009en,fr,de01-junij-2009SIST EN 15154-3:2009SLOVENSKI
STANDARD



SIST EN 15154-3:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15154-3March 2009ICS 71.040.10 English VersionEmergency safety showers - Part 3: Non plumbed-in bodyshowersDouches de sécurité - Partie 3: Douches pour le corps nonraccordées au réseau d'eauSicherheitsnotduschen - Teil 3: Körperduschen ohneWasseranschlussThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15154-3:2009: ESIST EN 15154-3:2009



EN 15154-3:2009 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Performance requirements .6 4.1 Efficacy .6 4.2 Quality of washing fluid .6 4.3 Flow .6 4.4 Container for washing fluid .7 5 Functional Requirements .7 5.1 General .7 5.2 Single use body showers .7 5.3 Multiple use body showers .8 5.4 Refillable body showers .8 6 Information for use .8 6.1 Labelling and marking .8 6.2 Further information and instructions for use to be supplied .9 Bibliography . 10
SIST EN 15154-3:2009



EN 15154-3:2009 (E) 3 Foreword This document (EN 15154-3:2009) has been prepared by Technical Committee CEN/TC 332 “Laboratory equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 15154 consists of the following parts, under the general title Emergency safety showers  Part 1: Plumbed-in body showers for laboratories  Part 2: Plumbed-in eye wash units  Part 3: Non plumbed-in body showers  Part 4: Non plumbed-in eyewash units  Part 5: Plumbed-in body showers for production facilities (in planning) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 15154-3:2009



EN 15154-3:2009 (E) 4 Introduction The first seconds after an accident in which the body or parts of the body have been exposed to harmful substances or heat are critical to keep the injury to a minimum. Non plumbed-in emergency safety body showers are designed and intended to be kept in the immediate proximity of persons working in a potentially hazardous area. The main purpose of these devices is to supply immediate first aid. Non plumbed-in emergency safety body showers can also allow continued washing on the way to medical care. SIST EN 15154-3:2009



EN 15154-3:2009 (E) 5 1 Scope This European Standard is a product specification, giving minimum performance requirements for non plumbed-in emergency safety body showers. It is applicable to body showers filled with a washing fluid by the manufacturer and to empty devices to be filled prior to putting into service. Both variations are for first aid use when the body or parts of the body have been exposed to harmful substances or heat. Requirements are also given concerning labelling, marking and information to be supplied by the manufacturer. Throughout this standard, the term “non plumbed-in emergency safety body shower” is referred to as “body shower”. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 556-1, Sterilization of medical devices – Requirements for medical de
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27