SIST IEC/TR2 61200-52:2000

Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems

SIST IEC/TR2 61200-52:2000

Name:SIST IEC/TR2 61200-52:2000   Standard name:Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems
Standard number:SIST IEC/TR2 61200-52:2000   language:English language
Release Date:31-Jan-2000   technical committee:ELI - Electrical and communication installations
Drafting committee:   ICS number:29.060.01 - Electrical wires and cables in general
SLOVENSKI STANDARD
SIST IEC/TR2 61200-52:2000
01-februar-2000
9RGLOR]DHOHNWULþQHLQãWDODFLMH±GHO,]ELUDLQQDPHVWLWHYHOHNWULþQHRSUHPH±
,QãWDODFLMVNLVLVWHP
Electrical installation guide - Part 52: Selection and erection of electrical equipment -
Wiring systems
Guide pour les installations électriques - Partie 52: Choix et mise en oeuvre des
matériels électriques - Canalisations
Ta slovenski standard je istoveten z: IEC/TS 61200-52
ICS:
29.060.01 (OHNWULþQHåLFHLQNDEOLQD Electrical wires and cables in
VSORãQR general
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST IEC/TR2 61200-52:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC/TR2 61200-52:2000

---------------------- Page: 2 ----------------------

SIST IEC/TR2 61200-52:2000
RAPPORT CEI
TECHNIQUE IEC
1200-52
TECHNICAL
Première édition
REPORT
First edition
1993-02
Guide pour les installations électriques —
Partie 52:
Choix et mise en oeuvre des matériels
électriques — Canalisations
Electrical installation guide —
Part 52:
Selection and erection of electrical
equipment — Wiring systems
© CEI 1993 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut 'être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
in writing from the publisher.
les microfilms, sans l'accord écrit de l'éditeur.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE
IEC MetHpyHapopIlaR 3neKTpoTexHw4ecKaR HOMHCCHR
vigueur
Pour prix, voir catalogue en •
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC/TR2 61200-52:2000
1200-52 © IEC: 1993 - 3 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ELECTRICAL INSTALLATION GUIDE —
Part 52: Selection and erection of electrical equipment —
Wiring systems
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in the
subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use published in the form of standards, technical
3)
reports or guides and they are accepted by the National Committees in that sense.
In order to promote international unification, IEC National Committees undertake to apply IEC International
4)
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
The main task of IEC technical committees is to prepare International Standards. In excep-
tional circumstances, a technical committee may propose the publication of a technical
repo rt of one of the following types:
• type 1, when the required suppo rt cannot be obtained for the publication of an Inter-
rts;
national Standard, despite repeated effo
• type 2, when the subject is still under technical development or where for any other
reason there is the future but not immediate possibility of an agreement on an Inter-
national Standard;
type 3, when a technical committee has collected data of a different kind from that

which is normally published as an International Standard, for example "state of the a rt".
Technical reports of types 1 and 2 are subject to review within three years of publication to
decide whether they can be transformed into International Standards. Technical reports of
type 3 do not necessarily have to be reviewed until
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27