|
SIST EN ISO 14919:2015
01-marec-2015
1DGRPHãþD
SIST EN ISO 14919:2002
9URþHEUL]JDQMHäLFHSDOLFHLQYUYL]DSODPHQVNRLQREORþQREUL]JDQMH
.ODVLILNDFLMD7HKQLþQLGREDYQLSRJRML,62
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification -
Technical supply conditions (ISO 14919:2015)
Thermisches Spritzen - Drähte, Stäbe und Schnüre zum Flammspritzen und
Lichtbogenspritzen - Einteilung - Technische Lieferbedingungen (ISO 14919:2015)
Projection thermique - Fils, baguettes et cordons pour projection thermique à l'arc et au
pistolet dans une flamme - Classification - Conditions techniques d'approvisionnement
(ISO 14919:2015)
Ta slovenski standard je istoveten z: EN ISO 14919:2015
ICS:
25.220.20 Površinska obdelava Surface treatment
SIST EN ISO 14919:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14919:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 14919:2015
EUROPEAN STANDARD
EN ISO 14919
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 25.220.20 Supersedes EN ISO 14919:2001
English Version
Thermal spraying - Wires, rods and cords for flame and arc
spraying - Classification - Technical supply conditions (ISO
14919:2015)
Projection thermique - Fils, baguettes et cordons pour Thermisches Spritzen - Drähte, Stäbe und Schnüre zum
projection thermique à l'arc et au pistolet dans une flamme - Flammspritzen und Lichtbogenspritzen - Einteilung -
Classification - Conditions techniques d'approvisionnement Technische Lieferbedingungen (ISO 14919:2015)
(ISO 14919:2015)
This European Standard was approved by CEN on 25 October 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14919:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14919:2015
EN ISO 14919:2015 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14919:2015
EN ISO 14919:2015 (E)
Foreword
This document (EN ISO 14919:2015) has been prepared by Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 107 "Metallic and other inorganic coatings".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2015, and conflicting national standards shall be withdrawn at the
latest by July 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14919:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14919:2015 has been approve
...