|
STANDARD
SIST EN 3646-002:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3646-002
March 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200
°C continu - Partie 002 : Spécification de performances et arrangements des contacts
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3646-002:2007: ESIST EN 3646-002:2009
EN 3646-002:2007 (E) 2 Contents Page Foreword.3 0 Introduction.4 1 Scope.4 2 Normative references.4 3 Description and codification of class.5 4 Definitions.5 5 Operating conditions.5 6 Type codes.7 7 Polarization.8 8 Housing sizes and contact arrangements.8 9 Contacts.12 10 Filler plugs.12 11 Rear accessories.12 12 Tooling.12 13 Assembly and wiring instructions.12
SIST EN 3646-002:2009
EN 3646-002:2007 (E) 3 Foreword This document (EN 3646-002:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be with-drawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3646-002:2009
EN 3646-002:2007 (E) 4 0 Introduction This family of connectors is derived from MIL-C-26482 series 2, the NAS 1599 with it is intermateable. 1 Scope This standard defines the performances and contact arrangements groups for bayonet coupling circular con-nectors, intended for use in an operating temperature range of − 65 °C to 175 °C or 200 °C continuous. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-209,
Aerospace series — Elements of electrical and optical connection — Test methods — Part 209: Current temperature derating EN 3155-002,
Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3197,
Aerospace series — Installation of aircraft electrical and optical interconnection systems 1)
EN 3646 (series),
Aerospace series — Connectors, electrical, circular, bayonet coupling, operating tempera-ture 175 °C or 200 °C continuous EN 3646-001,
Aerospace series — Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous — Part 001: Technical specification EN 3660-002,
Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards EN 4529-002,
Aerospace series — Elements of electrical and optical connection — Sealing plugs — Part 002: Index of products standards MIL-C-26482G,
Connector, Electrical, (Circular, Miniature, Quick Disconnect, Environment Resisting), Recep-tacles and Plugs, General Specification for 2)
NAS 1599, (Inactive) Connectors, General Purpose, Electrical, Miniature Circular, Environment Resisting, 200 °C Maximum Temperature 3)
1) Published as ASD Prestandard at the date of publication of this stan
...