|
SIST HD 60364-4-43:2011
01-maj-2011
1DGRPHãþD
SIST HD 384.4.43 S2:2003
1L]NRQDSHWRVWQHHOHNWULþQHLQãWDODFLMHGHO=DãþLWQLXNUHSL=DãþLWDSUHG
QDGWRNL
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against
overcurrent
Errichten von Niederspannungsanlagen - Teil 4-43: Schutzmaßnahmen - Schutz bei
Überstrom
Installations électriques à basse tension - Partie 4-43: Protection pour assurer la sécurité
- Protection contre les surintensités
Ta slovenski standard je istoveten z: HD 60364-4-43:2010
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST HD 60364-4-43:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST HD 60364-4-43:2011
---------------------- Page: 2 ----------------------
SIST HD 60364-4-43:2011
HARMONIZATION DOCUMENT
HD 60364-4-43
DOCUMENT D'HARMONISATION
March 2010
HARMONISIERUNGSDOKUMENT
ICS 91.140.50; 29.120.50 Supersedes HD 384.4.43 S2:2001 + corr. Dec.2005
English version
Low-voltage electrical installations -
Part 4-43: Protection for safety -
Protection against overcurrent
(IEC 60364-4-43:2008, modified + corrigendum Oct. 2008)
Installations électriques à basse tension - Errichten von Niederspannungsanlagen -
Partie 4-43: Protection pour assurer la Teil 4-43: Schutzmaßnahmen -
sécurité - Schutz bei Überstrom
Protection contre les surintensités (IEC 60364-4-43:2008, modifiziert +
(CEI 60364-4-43:2008, modifiée + Corrigendum Oct. 2008)
corrigendum oct. 2008)
This Harmonization Document was approved by CENELEC on 2010-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
Harmonization Document at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on
application to the Central Secretariat or to any CENELEC member.
This Harmonization Document exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. HD 60364-4-43:2010 E
---------------------- Page: 3 ----------------------
SIST HD 60364-4-43:2011
HD 60364-4-43:2010 - 2 -
Foreword
The text of document 64/1641/FDIS, future edition 1 of IEC 60364-4-43, prepared by TC 64, Electrical
installations and protection against electric shock, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by SC 64B, Electrical installations and protection against electric shock –
Protection against thermal effects, of Technical Committee CENELEC TC 64, Electrical installations and
protection against electric shock, was submitted to the formal vote.
The combined texts were approved by CENELEC as HD 60364-4-43 on 2010-03-01.
This document supersedes HD 384.4.43 S2:2001 + corrigendum December 2005.
The main changes with respect to HD 384.4.43 S2:2001 are listed below:
– Introduction of new informative Annexes B, C and D.
– Information concerning flexible cables added to Scope.
– The word “phase” changed to “line” throughout the standard.
– Requirement not to distribute the neutral in IT systems changed to a NOTE.
– Requirements added for overload detection for the neutral conductor for harmonic currents.
– Requirement that devices for protection against short-circuit current be capable of making as well as
breaking short-circuit current added.
– Information added to clarify protection against overload current.
– Requirements where devices for protection against overload need not be provided expanded.
– More examples given where omission of devices for protection against overload is permitted.
– Requirements where devices for protection against short-circuit need not be provided expanded.
– Requirements for short-circuit current ratings of busbar trunking systems added.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or
...