|
STANDARD
SIST EN 2713-002:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2713-002
July 2006 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: Screened and jacketed - General
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 002 : Blindés et gainés - Généralités
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 002: Geschirmt und ummantelt - Allgemeines This European Standard was approved by CEN on 6 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2713-002:2006: ESIST EN 2713-002:2009
EN 2713-002:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Definitions and symbols.5 4 List of product standards.5 5 Construction.5 5.1 Number of cores.5 5.2 Colour coding of cores and jacket.6 6 Identification and marking.9 7 Technical specification.9
SIST EN 2713-002:2009
EN 2713-002:2006 (E) 3 Foreword This European Standard (EN 2713-002:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. SIST EN 2713-002:2009
EN 2713-002:2006 (E) 4 1 Scope This standard specifies the list of product standards and common characteristics of single and multicore screened and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating tem-peratures between − 55 °C and 200 °C (unless otherwise specified in product standards). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2235, Aerospace series — Cables, electrical, single and multicore, screened and jacketed — Technical specification EN 2713-001, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 001: Technical specification1) EN 2713-003, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard1) EN 2713-004, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 004: Screened (braided) and jacketed, ink jet printable — Product standard1) EN 2713-005, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 005: Screened (spiral) and jacketed — CO2 laser print-able — Product standard1) EN 2713-006, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 006: Screened (braided) and jacketed — CO2 laser print-able — Product standard1) EN 2713-007, Aerospace series — Cables, electrical, single and multicore for general purpose — Operating temperatures between − 55 °C and 200 °C — Part 007: Screened (spiral) and jacketed — UV laser print-able — Product
...