SIST EN 3375-005:2009

Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard

SIST EN 3375-005:2009

Name:SIST EN 3375-005:2009   Standard name:Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard
Standard number:SIST EN 3375-005:2009   language:English language
Release Date:19-Apr-2009   technical committee:I13 - Imaginarni 13
Drafting committee:   ICS number:49.060 - Aerospace electric equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 005: Doppelt geschirmt + Metallband - 77 Ohm - Typ WV - ProduktnormSérie aérospatiale - Câbles électriques pour transmission de données numériques - Partie 005: Double tresse + ruban métallique - 77 Ohms - Type WV - Norme de produitAerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3375-005:2007SIST EN 3375-005:2009en,de01-maj-2009SIST EN 3375-005:2009SLOVENSKI
STANDARD



SIST EN 3375-005:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3375-005November 2007ICS 49.060 English VersionAerospace series - Cable, electrical, for digital data transmission- Part 005: Double braid + metallic layer - 77 Ohms - Type WV -Product standardSérie aérospatiale - Câbles électriques pour transmissionde données numériques - Partie 005: Double tresse +ruban métallique - 77 Ohms - Type WV - Norme de produitLuft- und Raumfahrt - Elektrische Leitungen fürDigitaldatenübertragungen - Teil 005: Doppelt geschirmt +metallband - 77 Ohm - Type WV - ProduktnormThis European Standard was approved by CEN on 23 May 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-005:2007: ESIST EN 3375-005:2009



EN 3375-005:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.5 4.1 Dimensions and mass.5 4.2 General characteristics.6 4.3 Electrical characteristics.6 5 Tests.6 6 Quality assurance.9 7 Identification and marking (according to EN 3375-002 and TR 6058).10 7.1 Designation.10 7.2 Short designation.10 7.3 Marking.10 7.4 Colour of the marking on the jacket.10 7.5 Colour of components.10 8 Packaging.11 9 Technical specification.11
SIST EN 3375-005:2009



EN 3375-005:2007 (E) 3 Foreword This document (EN 3375-005:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3375-005:2009



EN 3375-005:2007 (E) 4 1 Scope This standard specifies the required characteristics of a high immunity (double braid + metallic layer), 77 Ohms, size 24 electrical cable type WV, intended for digital data transmissions. General characteristics are given in 4.2. Main electrical characteristics are given in 4.3. It shall be used together with EN 3375-001 and EN 3375-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard. EN 2084, Aerospace series — Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification. EN 3375-001, Aerospace series — Cable, electrical, for digital data transmission — Part 001: Technical specification. 1) EN 3375-002, Aerospace series — Cable, electrical, for digital data transmission — Part 002: General. 1) EN 3475-100*, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General. EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts.
TR 6058, Aerospace series — Cable code identification list. 2) 3 Terms and definitions For the purposes of this document, the terms and definitions g
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27