|
Senkschrauben, mit Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus Titanlegierung, anodisiert, mit Aluminium pigmenttete Beschichtung, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °CSérie aérospatiale - Vis à tête fraisée 100
normale, à empreinte cruciforme déportée, filetées jusqu'à proximité de la tête, en alliage de titane, anodisées, avec revêtement alumino-organique, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °CAerospace series - Screws, 100
countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studs49.025.30TitanTitanium49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4509:2006SIST EN 4509:2009en,de01-junij-2009SIST EN 4509:2009SLOVENSKI
STANDARD
SIST EN 4509:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4509
June 2006 ICS 49.030.20 English Version
Aerospace series - Screws, 100
countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Série aérospatiale - Vis à tête fraisée 100
normale, à empreinte cruciforme déportée, filetées jusqu'à proximité de la tête, en alliage de titane, anodisées, avec revêtement alumino-organique, série métrique - Classification : 1 100 MPa (à température ambiante) / 315 °C
Luft- und Raumfahrt - 100
Senkschrauben, mit Flügelkreuzschlitz, Gewinde annähernd bis Kopf, aus Titanlegierung, anodisiert, mit Aluminium pigmenttete Beschichtung, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C This European Standard was approved by CEN on 13 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4509:2006: ESIST EN 4509:2009
EN 4509:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.8 5 Marking.8 6 Technical specification.8
SIST EN 4509:2009
EN 4509:2006 (E) 3 Foreword This European Standard (EN 4509:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CEN
...