|
SIST-TP CEN/TR 1335-4:2010
01-januar-2010
Pisarniško pohištvo - Pisarniški delovni stoli - 4. del: Pojasnila k EN 1335-1:2000
(Mere)
Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000
(Dimensions)
Büromöbel - Büro-Arbeitsstuhl - Teil 4: Auslegungen zu EN 1335-1:2000 (Maße)
Mobilier de bureau - Sièges de travail de bureau - Partie 4: Clarifications apportées à
l'EN 1335-1:2000 (Dimensions)
Ta slovenski standard je istoveten z: CEN/TR 1335-4:2009
ICS:
97.140 Pohištvo Furniture
SIST-TP CEN/TR 1335-4:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 1335-4:2010
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 1335-4:2010
TECHNICAL REPORT
CEN/TR 1335-4
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
October 2009
ICS 97.140
English Version
Office furniture - Office work chair - Part 4: Clarifications to EN
1335-1:2000 (Dimensions)
Mobilier de bureau - Sièges de travail de bureau - Partie 4: Büromöbel - Büro-Arbeitsstuhl - Teil 4: Auslegungen zu EN
Clarifications apportées à l'EN 1335-1:2000 (Dimensions) 1335-1:2000 (Maße)
This Technical Report was approved by CEN on 8 September 2009. It has been drawn up by the Technical Committee CEN/TC 207.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 1335-4:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 1335-4:2010
CEN/TR 1335-4:2009 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Clarifications .5
3.1 Adjustable .5
3.1.1 General .5
3.1.2 Independently adjustable .5
3.1.3 Dependently adjustable .5
3.2 Determination of point "S" .5
3.3 Position of seat and back rest .6
3.4 Seat height .6
3.5 Adjustable seat depth .6
3.6 Inclination of seat surface .6
3.7 Adjustable backrest inclination .6
3.8 Length of armrest .6
3.9 Height of arm rest .6
3.10 Clear width between the arm rests .7
3.
...