SIST EN 60433:2000

Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 60433:1998)

SIST EN 60433:2000

Name:SIST EN 60433:2000   Standard name:Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 60433:1998)
Standard number:SIST EN 60433:2000   language:English language
Release Date:31-Jan-2000   technical committee:IZL - Insulators
Drafting committee:   ICS number:29.080.10 - Insulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Insulators for overhead lines with a nominal voltage above 1kV - Ceramic insulators for a.c. systems - Characteristics of insulators units of the long rod type (IEC 60433:1998)Isolatoren für Freileitungen mit einer Nennspannung über 1 kV - Keramik-Isolatoren für Wechselspannungssysteme - Kenngrößen von Kettenisolatoren in LangstabausführungIsolateurs pour lignes aériennes de tension nominale supérieure à 1 kV - Isolateurs céramiques pour systèmes à courant alternatif - Caractéristiques des éléments de chaînes d'isolateurs à fût longInsulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 60433:1998)29.240.20DaljnovodiPower transmission and distribution lines29.080.10IzolatorjiInsulatorsICS:Ta slovenski standard je istoveten z:EN 60433:1998SIST EN 60433:2000en01-februar-2000SIST EN 60433:2000SLOVENSKI
STANDARD



SIST EN 60433:2000



SIST EN 60433:2000



SIST EN 60433:2000



SIST EN 60433:2000



SIST EN 60433:2000



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60433Troisième éditionThird edition1998-08Isolateurs pour lignes aériennesde tension nominale supérieure à 1000 V –Isolateurs céramiques pour systèmesà courant alternatif –Caractéristiques des éléments de chaînesd’isolateurs à fût longInsulators for overhead lineswith a nominal voltage above 1000 V –Ceramic insulators for a.c. systems –Characteristics of insulator unitsof the long rod type Commission Electrotechnique Internationale International Electrotechnical
CommissionPour prix, voir catalogue en vigueurFor price, see current
catalogueÓ IEC 1998
Droits de reproduction réservés
¾ Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucunprocédé, électronique ou mécanique, y compris la photo-copie et les microfilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without
permission inwriting
from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: [email protected] IEC web site
http: // CODE PRIXPRICE CODEGSIST EN 60433:2000



60433 © IEC:1998– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________INSULATORS FOR OVERHEAD LINESWITH A NOMINAL VOLTAGE ABOVE 1000 V –Ceramic insulators for a.c. systems –Characteristics of insulator units of the long rod typeFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60433 has been prepared by subcommittee 36B: Insulators foroverhead lines, of IEC technical committee 36: Insulators.This third edition cancels and replaces the second edition published in 1980 and constitutes atechnical revision.T
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27