|
SIST EN ISO 8256:2004
01-oktober-2004
1DGRPHãþD
SIST EN ISO 8256:1999
3ROLPHUQLPDWHULDOL±'RORþHYDQMHQDWH]QRXGDUQHWUGQRVWL ,62
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
Kunststoffe - Bestimmung der Schlagzugzähigkeit (ISO 8256:2004)
Plastiques - Détermination de la résistance au choc-traction (ISO 8256:2004)
Ta slovenski standard je istoveten z: EN ISO 8256:2004
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 8256:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8256:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 8256:2004
EUROPEAN STANDARD
EN ISO 8256
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 83.080.01 Supersedes EN ISO 8256:1996
English version
Plastics - Determination of tensile-impact strength (ISO
8256:2004)
Plastiques - Détermination de la résistance au choc-
traction (ISO 8256:2004)
This European Standard was approved by CEN on 1 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8256:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8256:2004
EN ISO 8256:2004 (E)
Foreword
This document (EN ISO 8256:2004) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.
This document supersedes EN ISO 8256:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 8256:2004 has been approved by CEN as EN ISO 8256:2004 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8256:2004
INTERNATIONAL ISO
STANDARD 8256
Second edition
2004-07-01
Plastics — Determination of
tensile-impact strength
Plastiques — Détermination de la résistance au choc-traction
Reference number
ISO 8256:2004(E)
©
ISO 2004
---------------------- Page: 5 ----------------------
SIST EN ISO 8256:2004
ISO 8256:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
...