SIST EN 62271-100:2009

High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers (IEC 62271-100:2008)

SIST EN 62271-100:2009

Name:SIST EN 62271-100:2009   Standard name:High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers (IEC 62271-100:2008)
Standard number:SIST EN 62271-100:2009   language:English language
Release Date:20-Apr-2009   technical committee:SKA - Switchgear and control gear
Drafting committee:   ICS number:29.130.10 - High voltage switchgear and controlgear

SLOVENSKI STANDARD
01-junij-2009
1DGRPHãþD
SIST EN 62271-100:2002
SIST EN 62271-100:2002/A1:2003
SIST EN 62271-100:2002/A2:2007
9LVRNRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYHGHO,]PHQLþQLRGNORSQLNL ,(&

High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers
(IEC 62271-100:2008)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 100: Wechselstrom-
Leistungsschalter (CEI 62271-100:2008)
Appareillage à haute tension - Partie 100: Disjoncteurs à courant alternatif (IEC 62271-
100:2008)
Ta slovenski standard je istoveten z: EN 62271-100:2009
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62271-100
NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM
ICS 29.130.10 Supersedes EN 62271-100:2001 + A1:2002 + A2:2006

English version
High-voltage switchgear and controlgear -
Part 100: Alternating-current circuit-breakers
(IEC 62271-100:2008)
Appareillage à haute tension -  Hochspannungs-Schaltgeräte
Partie 100: Disjoncteurs und -Schaltanlagen -
à courant alternatif Teil 100: Wechselstrom-Leistungsschalter
(CEI 62271-100:2008) (IEC 62271-100:2008)

This European Standard was approved by CENELEC on 2009-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-100:2009 E
Foreword
The text of document 17A/815/FDIS, future edition 2 of IEC 62271-100, prepared by SC 17A,
High-voltage switchgear and controlgear, of IEC TC 17, Switchgear and controlgear, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62271-100 on 2009-03-01.
This European Standard supersedes EN 62271-100:2001 + A1:2002 + A2:2006 + A2:2006/corrigendum
November 2006.
The main changes with respect to EN 62271-100:2001 are listed below:
– introduction of harmonised (IEC and IEEE) TRV waveshapes for rated voltages of 100 kV and above
(amendment 1 to EN 62271-100:2001);
– introduction of cable and line systems with their associated TRVs for rated voltages below 100 kV
(amendment 2 to EN 62271-100:2001);
– inclusion of IEC 61633 and IEC 62271-308.
This standard shall be read in conjunction with EN 62271-1:2008, to which it refers and which is
applicable unless otherwise specified in this standard. In order to simplify the indication of corresponding
requirements, the same numbering of clauses and subclauses is used as in EN 62271-1. Amendments to
these clauses and subclauses are given under the same references whilst additional subclauses are
numbered from 101.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62271-100:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60044-1 NOTE  Harmonized as EN 60044-1:1999 (modified).
IEC 60044-2 NOTE  Harmonized as EN 60044-2:1999 (modified).
IEC 60077 NOTE  Harmonized in EN 60077 series (modified).
IEC 60099-4 NOTE  Harmonized as EN 60099-4:2004 (modified).
IEC 60143-2 NOTE  Harmonized as EN 60143-2:1994 (not modified).
IEC 62271-109 NOTE  Harmonized as EN 62271-109:2009 (not modified).
IEC 62271-200 NOTE  Harmonized as EN 62271-200:2004 (not modified).
IEC 62271-203 NOTE  Harmonized as EN 62271-203:2004 (not modified).
__________
– 3 – EN 62271-100:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-151 2001 International Electrotechnical Vocabulary - -
(IEV) -
Part 151: Electrical and magnetic devices

IEC 60050-441 1984 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 441: Switchgear, controlgear and
fuses
IEC 60050-601 1985 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 601: Generation, transmission and
distribution of electricity - General

IEC 60050-604 1987 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 604: Generation, transmission and
distribution of electricity - Operation

1) 2)
IEC 60059 - IEC standard current ratings EN 60059 1999

IEC 60060-1 1989 High-voltage test techniques -
+ corr. March 1990 Part 1: General definitions and test HD 588.1 S1 1991
requirements
1) 2)
IEC 60071-2 - Insulation co-ordination - EN 60071-2 1997
Part 2: Application guide
1) 2)
IEC 60137 - Insulated bushings for alternating voltages EN 60137 2008
above 1 000 V
IEC 60255-3 1989 Electrical relays - - EN 60255-3 1998
(mod) Part 3: Single input energizing quantity + corr. January 1998
measuring relays with dependent or
independent time
1) 2)
IEC 60296 - Fluids for electrotechnical applications - EN 60296 2004
Unused mineral insulating oils for + corr. September 2004
transformers and switchgear
1) 2)
IEC 60376 - Specification of technical grade sulfur EN 60376 2005
hexafluoride (SF ) for use in electrical
equipment
1) 2)
IEC 60480 - Guidelines for the checking and treatment of EN 60480 2004
sulphur hexafluoride (SF ) taken from
electrical equipment and specification for its
re-use
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

1) 2)
IEC 60529 - Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr. May 1993

1)
IEC/TS 61634 - High-voltage switchgear and controlgear - - -
Use and handling of sulphur hexafluoride
(SF ) in high-voltage switchgear and
controlgear
IEC 62271-1 2007 High-voltage switchgear and controlgear - EN 62271-1 2008
Part 1: Common specifications
IEC 62271-101 2006 High-voltage switchgear and controlgear - EN 62271-101 2006
Part 101: Synthetic testing
IEC 62271-102 2001 High-voltage switchgear and controlgear -
+ corr. April 2002 Part 102: Alternating current disconnectors EN 62271-102 2002
+ corr. May 2003 and earthing switches + corr. March 2005

1) 2)
IEC 62271-110 - High-voltage switchgear and controlgear - EN 62271-110 2005
Part 110: Inductive load switching

IEC 62271-100
Edition 2.0 2008-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
High-voltage switchgear and controlgear –
Part 100: Alternating-current circuit-breakers

Appareillage à haute tension –
Partie 100: Disjoncteurs à courant alternatif

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XN
CODE PRIX
ICS 29.130.10 ISBN 2-8318-9714-9

– 2 – 62271-100 © IEC:2008
CONTENTS
FOREWORD.19
1 General .21
1.1 Scope .21
1.2 Normative references .22
2 Normal and special service conditions .23
3 Terms and definitions .23
3.1 General terms.23
3.2 Assemblies .27
3.3 Parts of assemblies .27
3.4 Switching devices .27
3.5 Parts of circuit-breakers.29
3.6 Operation .31
3.7 Characteristic quantities .33
3.8 Index of definitions .39
4 Ratings.43
4.1 Rated voltage (U ) .44
r
4.2 Rated insulation level .44
4.3 Rated frequency (f ).45
r
4.4 Rated normal current (I ) and temperature rise .45
r
4.5 Rated short-time withstand current (I ) .45
k
4.6 Rated peak withstand current (I ) .45
p
4.7 Rated duration of short circuit (t ).45
k
4.8 Rated supply voltage of closing and opening devices and of auxiliary and
control circuits (U ) .45
a
4.9 Rated supply frequency of closing and opening devices and auxiliary
circuits.45
4.10 Rated pressures of compressed gas supply for insulation, operation and/or
interruption .46
4.101 Rated short-circuit breaking current (I ) .46
sc
4.101.1 AC component of the rated short-circuit breaking current.46
4.101.2 DC time constant of the rated short-circuit breaking current .46
4.102 Transient recovery voltage related to the rated short-circuit breaking
current.47
4.102.1 Representation of TRV waves.47
4.102.2 Representation of TRV.48
4.102.3 Standard values of TRV related to the rated short-circuit
breaking current .49
4.102.4 Standard values of ITRV .57
4.103 Rated short-circuit making current .57
4.104 Rated operating sequence .58
4.105 Characteristics for short-line faults .58
4.106 Rated out-of-phase making and breaking current.59
4.107 Rated capacitive switching currents .60
4.107.1 Rated line-charging breaking current.60
4.107.2 Rated cable-charging breaking current .60
4.107.3 Rated single capacitor bank breaking current .61
4.107.4 Rated back-to-back capacitor bank breaking current .62

62271-100 © IEC:2008 – 3 –
4.107.5 Rated single capacitor bank inrush making current.62
4.10
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27