SIST EN 1010-1:2005+A1:2011

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

SIST EN 1010-1:2005+A1:2011

Name:SIST EN 1010-1:2005+A1:2011   Standard name:Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
Standard number:SIST EN 1010-1:2005+A1:2011   language:English language
Release Date:06-Apr-2011   technical committee:GRT - Graphical technology
Drafting committee:   ICS number:13.110 - Safety of machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame AnforderungenSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 1: Prescriptions communesSafety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements85.100Oprema za papirno industrijoEquipment for the paper industry37.100.10Reprodukcijska opremaReproduction equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1010-1:2004+A1:2010SIST EN 1010-1:2005+A1:2011en,fr01-maj-2011SIST EN 1010-1:2005+A1:2011SLOVENSKI
STANDARD



SIST EN 1010-1:2005+A1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1010-1:2004+A1
December 2010 ICS 37.100.10; 85.100 Supersedes EN 1010-1:2004English Version
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 1: Prescriptions communes
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 1: Gemeinsame Anforderungen This European Standard was approved by CEN on 7 June 2004 and includes Amendment 1 approved by CEN on 30 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1010-1:2004+A1:2010: ESIST EN 1010-1:2005+A1:2011



EN 1010-1:2004+A1:2010 (E) 2 Contents Page Foreword .4Introduction .51 Scope .52 Normative references .63 Terms and definitions .94 List of significant hazards . 115 Safety requirements and/or protective measures . 145.1 General . 145.2 Requirements common to printing and paper converting machines . 145.2.1 Safeguarding of danger points . 145.2.2 Guards and interlocks . 165.2.3 Devices for setting-up, cleaning, trouble-shooting during the work process and maintenance . 175.2.4 Explosion prevention and protection .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27