|
SIST EN 16604-10:2019
01-september-2019
Nadomešča:
SIST EN 16604-10:2014
Vesoljska vzdržljivost - Zahteve za zmanjšanje količine vesoljskih odpadkov (ISO
24113:2011, spremenjen)
Space sustainability - Space debris mitigation requirements (ISO 24113:2011, modified)
Nachhaltigkeit im Weltraum - Anforderungen zur Eindämmung des Weltraummülls (ISO
24113:2011, modifiziert)
Développement durable de l’espace - Exigences relatives à la réduction des débris
spatiaux (ISO 24113:2011, modifiée)
Ta slovenski standard je istoveten z: EN 16604-10:2019
ICS:
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16604-10:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16604-10:2019
---------------------- Page: 2 ----------------------
SIST EN 16604-10:2019
EUROPEAN STANDARD EN 16604-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 49.140
Supersedes EN 16604-10:2014
English version
Space sustainability - Space debris mitigation
requirements (ISO 24113:2011, modified)
Durabilité des activités spatiales - Exigences relatives à Nachhaltigkeit im Weltraum - Anforderungen zur
la réduction des débris (ISO 24113:2011 modifiée) Eindämmung des Weltraummülls (ISO 24113:2011,
modifiziert)
This European Standard was approved by CEN on 4 February 2019.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2019 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN 16604-10:2019 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16604-10:2019
EN 16604-10:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviated terms . 7
4.1 Symbols . 7
4.2 Abbreviated terms . 7
5 Protected regions . 8
5.1 General . 8
5.2 LEO protected region . 8
5.3 GEO protected region .
...