|
SIST EN 13979-1:2020
01-november-2020
Nadomešča:
SIST EN 13979-1:2004+A2:2011
Železniške naprave - Kolesne dvojice in podstavni vozički - Monoblok kolesa -
Postopek za tehnično odobritev - 1. del: Kovana in valjana kolesa
Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval
procedure - Part 1: Forged and rolled wheels
Bahnanwendungen - Radsätze und Drehgestelle - Vollräder - Technische
Zulassungsverfahren - Teil 1: Geschmiedete und gewalzte Räder
Applications ferroviaires - Essieux montés et bogies - Roues monobloc - Procédure
d'homologation technique - Partie 1 : Roues forgées et laminées
Ta slovenski standard je istoveten z: EN 13979-1:2020
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 13979-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13979-1:2020
---------------------- Page: 2 ----------------------
SIST EN 13979-1:2020
EN 13979-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 45.040 Supersedes EN 13979-1:2003+A2:2011
English Version
Railway applications - Wheelsets and bogies - Monobloc
Wheels - Technical approval procedure - Part 1: Forged
and rolled wheels
Applications ferroviaires - Essieux montés et bogies - Bahnanwendungen - Radsätze und Drehgestelle -
Roues monobloc - Procédure d'homologation Vollräder - Technische Zulassungsverfahren - Teil 1:
technique - Partie 1 : Roues forgées et laminées Geschmiedete und gewalzte Räder
This European Standard was approved by CEN on 8 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13979-1:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13979-1:2020
EN 13979-1:2020 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Parameters for the definition of the application covered . 8
4.1 General . 8
4.2 Geometric parameters for interchangeability . 8
4.2.1 General . 8
4.2.2 Functional requirements . 8
4.2.3 Assembly requirements .
...