SIST EN 14978:2016+A1:2021

Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods

SIST EN 14978:2016+A1:2021

Name:SIST EN 14978:2016+A1:2021   Standard name:Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
Standard number:SIST EN 14978:2016+A1:2021   language:English language
Release Date:05-Oct-2021   technical committee:ITEK - Textile and textile products
Drafting committee:   ICS number:97.150 - Floor coverings
SLOVENSKI STANDARD
SIST EN 14978:2016+A1:2021
01-november-2021
Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z
elektronskim žarkom - Specifikacije, zahteve in preskusne metode
Laminate floor coverings - Elements with acrylic based surface layer, electron beam
cured - Specifications, requirements and test methods
Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-
Basis - Spezifikationen, Anforderungen und Prüfverfahren
Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des
faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14978:2016+A1:2021
ICS:
97.150 Talne obloge Floor coverings
SIST EN 14978:2016+A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14978:2016+A1:2021

---------------------- Page: 2 ----------------------
SIST EN 14978:2016+A1:2021


EN 14978:2016+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2021
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 14978:2016
English Version

Laminate floor coverings - Elements with acrylic based
surface layer, electron beam cured - Specifications,
requirements and test methods
Revêtements de sol stratifiés - Éléments à parement à Laminatböden - Elemente mit einer
base acrylique traités par des faisceaux d'électrons - elektronenstrahlgehärteten Deckschicht auf Acryl-
Spécifications, exigences et méthodes d'essai Basis - Spezifikationen, Anforderungen und
Prüfverfahren
This European Standard was approved by CEN on 27 November 2015 and includes Amendment 1 approved by CEN on 18 July
2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14978:2016+A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14978:2016+A1:2021
EN 14978:2016+A1:2021 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Characteristics . 7
5 Classification . 7
5.1 General . 7
5.2 Floor coverings with a common gloss level . 7
5.3 Floor coverings with a high gloss level . 8
6 Additional characteristics and requirements . 9
7 Marking, designation and packaging .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27