|
STANDARD
SIST EN 1993-4-1:2007/AC:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1993-4-1:2007/AC
April 2009
Avril 2009
April 2009 ICS 65.040.20; 91.010.30; 91.080.10 English version Version Française Deutsche Fassung
Eurocode 3 - Design of steel structures - Part 4-1: Silos
Eurocode 3 - Calcul des structures en acier - Partie 4-1: Silos
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-1: Silos This corrigendum becomes effective on 22 April 2009 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 22 avril 2009 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 22.April 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN 1993-4-1:2007/AC:2009 D/E/FSIST EN 1993-4-1:2007/AC:2009
EN 1993-4-1:2007/AC:2009 (E) 2 1) Modifications to "Foreword" "Additional information specific to EN1993-4-1", last paragraph, replace the reference "2.10" with "2.9". "National Annex for EN1993-4-1", replace "5.4.4 (2), (3) and (4)" with "5.4.4 (2), (3)b) and (3)c)". 2) Modification to 1.1 Paragraph "(8)", replace "10 tonnes" with "100 kN (10 tonnes)". 3) Modifications to 1.2 Reference to "EN 1991", in the line:
"Part 1.5:
Actions on structures – Accidental actions;", replace "Part 1.5" with "Part 1.7". Title of "EN 10025", correct the title into "Hot rolled products of structural steels". Reference to "EN 10147", replace "EN 10147" with "EN 10149". 4) Modification to 1.7.1 Paragraph "(1)", "Figure 1.2", Subfigure "a)", Subtitle, replace "general coordinate system" with "global coordinate system". 5) Modification to 1.7.2 Paragraph "(4)", "Figure 1.3", Subfigure "a)", Subtitle, replace "general coordinate system" with "global coordinate system". 6) Modification to 2.6 Paragraph "(3)", replace "EN 10147" with "EN 10149". 7) Modification to 4.3.1 Paragraph "(8)", "NOTE", replace "new = 16" with "new = 15ε". 8) Modification to 4.3.3 Paragraph "(5)", replace
...