|
SIST EN ISO 22007-4:2017
01-oktober-2017
1DGRPHãþD
SIST EN ISO 22007-4:2012
Polimerni materiali - Ugotavljanje toplotne prevodnosti in toplotne razprševalnosti
- 4. del: Metoda z laserskim bliskom (ISO 22007-4:2017)
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser
flash method (ISO 22007-4:2017)
Kunststoffe - Bestimmung der Wärmeleitfähigkeit und der Temperaturleitfähigkeit - Teil 4:
Laserblitzverfahren (ISO 22007-4:2017)
Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique -
Partie 4: Méthode flash laser (ISO 22007-4:2017)
Ta slovenski standard je istoveten z: EN ISO 22007-4:2017
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 22007-4:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22007-4:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 22007-4:2012
English Version
Plastics - Determination of thermal conductivity and
thermal diffusivity - Part 4: Laser flash method (ISO
22007-4:2017)
Plastiques - Détermination de la conductivité Kunststoffe - Bestimmung der Wärmeleitfähigkeit und
thermique et de la diffusivité thermique - Partie 4: der Temperaturleitfähigkeit - Teil 4:
Méthode flash laser (ISO 22007-4:2017) Laserblitzverfahren (ISO 22007-4:2017)
This European Standard was approved by CEN on 17 June 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22007-4:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22007-4:2017
EN ISO 22007-4:2017 (E)
European foreword
This document (EN ISO 22007-4:2017) has been prepared by Technical Committee ISO/TC 61 “Plastics”
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 22007-4:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22007-4:2017 has been approved by CEN as EN ISO 22007-4:2017 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22007-4:2017
-------------------
...