|
SIST ISO 24394:2020
01-julij-2020
Nadomešča:
SIST ISO 24394:2017
SIST ISO 24394:2017/Amd 1:2017
Varjenje v aeronavtiki - Preskušanje usposobljenosti varilcev in operaterjev
varjenja - Talilno varjenje kovinskih sestavnih delov
Welding for aerospace applications - Qualification test for welders and welding operators
-- Fusion welding of metallic components
Soudage pour applications aérospatiales - Épreuve de qualification pour soudeurs et
opérateurs -- Soudage par fusion des composants métalliques
Ta slovenski standard je istoveten z: ISO 24394:2018
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.01 Varjenje, trdo in mehko Welding, brazing and
spajkanje na splošno soldering in general
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST ISO 24394:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 24394:2020
---------------------- Page: 2 ----------------------
SIST ISO 24394:2020
INTERNATIONAL ISO
STANDARD 24394
Second edition
2018-12
Welding for aerospace applications —
Qualification test for welders and
welding operators — Fusion welding
of metallic components
Soudage pour applications aérospatiales — Épreuve de
qualification pour soudeurs et opérateurs — Soudage par fusion des
composants métalliques
Reference number
ISO 24394:2018(E)
©
ISO 2018
---------------------- Page: 3 ----------------------
SIST ISO 24394:2020
ISO 24394:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 24394:2020
ISO 24394:2018(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Qualification test requirements . 3
4.1 General . 3
4.1.1 Specific to the welder qualification test . 3
4.1.2 Specific to the welding operator qualification test. 3
4.2 Welding processes. 4
4.3 Welding positions . 4
4.4 Product types/semi-finished products applicable to welder qualification tests . 5
4.5 Material groups .12
4.6 Material thickness .
...