|
STANDARD
september 2004
Povezovalne naprave in pasivne komponente optičnih vlaken – Postopki
osnovnega preskušanja in merjenja – 3-30. del: Preiskovanje in meritve;
polirni kot in pozicija vlakna na več-vlaknenem spojniku z enojnim čepom
(IEC 61300-3-30:2003)*
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-30: Examinations and measurements - Polish
angle and fibre position on single ferrule multifibre connectors (IEC 61300-3-
30:2003)
ICS 33.180.20 Referenčna številka
SIST EN 61300-3-30:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61300-3-30
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2003
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures
Part 3-30: Examinations and measurements -
Polish angle and fibre position on single ferrule multifibre connectors
(IEC 61300-3-30:2003)
Dispositifs d'interconnexion Lichtwellenleiter-Verbindungselemente und
et composants passifs à fibres optiques - passive Bauteile -
Méthodes fondamentales d'essais Grundlegende Prüf- und Messverfahren
et de mesures Teil 3-30: Untersuchungen
Partie 3-30: Examens et mesures - und Messungen -
Angle de la face polie et position de la fibre Polierwinkel und Faserposition
sur l'embout des connecteurs multifibres von Mehrfaser-Steckverbindern
(CEI 61300-3-30:2003) mit einer Ferrule
(IEC 61300-3-30:2003)
This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-3-30:2003 E
---------------------- Page: 2 ----------------------
EN 61300-3-30:2003 - 2 -
Foreword
The text of document 86B/1747/FDIS, future edition 1 of IEC 61300-3-30, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-30 on 2002-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-12-01
__________
Endorsement notice
The text of the International Standard IEC 61300-3-30:2003 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE IEC
61300-3-30
INTERNATIONAL
Première édition
STANDARD
First edition
2003-01
Dispositifs d'interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 3-30:
Examens et mesures –
Angle de la face polie et position de la fibre
sur la ferrule unique des connecteurs multifibres
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 3-30:
Examinations and measurements –
Polish angle and fibre position on
single ferrule multifibre connectors
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compri
...