|
SIST EN 12941:1999/A2:2009
01-januar-2009
2SUHPD]DYDURYDQMHGLKDO=DãþLWQDþHODGDDOLNDSXFDVWODþQRILOWUDFLMR]UDND
=DKWHYHSUHVNXãDQMHR]QDþHYDQMH
Respiratory protective devices - Powered filtering devices incorporating a helmet or a
hood - Requirements, testing, marking
Atemschutzgeräte - Gebläsefiltergeräte mit einem Helm oder einer Haube -
Anforderungen, Prüfung, Kennzeichnung
Appareils de protection respiratoire - Appareils filtrants à ventilation assistée avec
casque ou cagoule - Exigences, essais, marquage
Ta slovenski standard je istoveten z: EN 12941:1998/A2:2008
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 12941:1999/A2:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12941:1999/A2:2009
---------------------- Page: 2 ----------------------
SIST EN 12941:1999/A2:2009
EUROPEAN STANDARD
EN 12941:1998/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 13.340.30
English Version
Respiratory protective devices - Powered filtering devices
incorporating a helmet or a hood - Requirements, testing,
marking
Appareils de protection respiratoire - Appareils filtrants à Atemschutzgeräte - Gebläsefiltergeräte mit einem Helm
ventilation assistée avec casque ou cagoule - Exigences, oder einer Haube - Anforderungen, Prüfung,
essais, marquage Kennzeichnung
This amendment A2 modifies the European Standard EN 12941:1998; it was approved by CEN on 25 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12941:1998/A2:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12941:1999/A2:2009
EN 12941:1998/A2:2008 (E)
Contents Page
Foreword.3
1 Modification to Clause 2 (Normative references) .4
2 Modification to 3.1 (Definitions) .4
3 Modification to 3.2 (Description).5
4 Modification to 4 (Designation) .5
5 Modification to 6.11.2.4.1 (Particle filters).5
6 Modification to Table 6 (Testing Schedule) .5
7 Modification to 7.1.3 (Filters) .5
8 Modification to 7.8 (Clogging) .6
9 Modification to 7.12.1 (General) .6
10 Modification to 7.12.2 (Particle filter efficiency) .6
11 Modification to 8.4.2 (Particle filters).7
12 Modification to 8.5 (Filter or filter package) .7
13 Modification to 9.2 (Filters) .
...