SIST-TS CEN/TS 16346:2012

Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate

SIST-TS CEN/TS 16346:2012

Name:SIST-TS CEN/TS 16346:2012   Standard name:Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
Standard number:SIST-TS CEN/TS 16346:2012   language:English language
Release Date:10-Oct-2012   technical committee:VLA - Water proofing
Drafting committee:   ICS number:75.140 - Waxes, bituminous materials and other petroleum products
SLOVENSKI STANDARD
SIST-TS CEN/TS 16346:2012
01-november-2012
Bitumen in bitumenska veziva - Ugotavljanje stopnje stabilnosti in neposredne
obstojnosti kationskih bitumenskih emulzij z 2/4 mm agregati
Bituminous binders - Determination of breaking behaviour and immediate adhesivity of
cationic bituminous emulsions with 2/4 mm aggregate
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Brechzeit und des
kurzfristigen Haftverhaltens von kationischen Bitumenemulsionen mit Gesteinskörnung
2/4 mm
Bitumes et liants bitumineux - Détermination du comportement à la rupture et de
l’adhésivité immédiate des émulsions cationiques de bitume avec un granulat de 2/4 mm
Ta slovenski standard je istoveten z: CEN/TS 16346:2012
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST-TS CEN/TS 16346:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16346:2012

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16346:2012


TECHNICAL SPECIFICATION
CEN/TS 16346

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2012
ICS 75.140; 91.100.50
English Version
Bituminous binders - Determination of breaking behaviour and
immediate adhesivity of cationic bituminous emulsions with 2/4
mm aggregate
Bitumes et liants bitumineux - Détermination du Bitumen und bitumenhaltige Bindemittel - Bestimmung der
comportement à la rupture et de l'adhésivité immédiate des Brechzeit und des kurzfristigen Haftverhaltens von
émulsions cationiques de bitume avec un granulat de 2/4 kationischen Bitumenemulsionen mit Gesteinskörnung 2/4
mm mm
This Technical Specification (CEN/TS) was approved by CEN on 25 March 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16346:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16346:2012
CEN/TS 16346:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .5
5 Reagents and material .5
6 Apparatus .5
7 Sampling .5
8 Procedure .5
9 Expression of results .6
10 Pre
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27