|
SIST EN ISO 6284:2002
01-februar-2002
Gradbeniške risbe - Prikaz omejenih deviacij (ISO 6284:1996)
Construction drawings - Indication of limit deviations (ISO 6284:1996)
Zeichnungen für das Bauwesen - Eintragung von Grenzabmaßen (ISO 6284:1996)
Dessins de génie civil - Indication des écarts limites (ISO 6284:1996)
Ta slovenski standard je istoveten z: EN ISO 6284:1999
ICS:
01.100.30 *UDGEHQLQDþUWL Construction drawings
SIST EN ISO 6284:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6284:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 6284:2002
---------------------- Page: 3 ----------------------
SIST EN ISO 6284:2002
---------------------- Page: 4 ----------------------
SIST EN ISO 6284:2002
---------------------- Page: 5 ----------------------
SIST EN ISO 6284:2002
---------------------- Page: 6 ----------------------
SIST EN ISO 6284:2002
INTERNATIONAL
STANDARD
Second edition
1996-l 2-l 5
Construction drawings - Indication of
limit deviations
Dessins de g6nie civil - Indica Con des &arts limites
Reference number
IS0 6284:1996(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 6284:2002
IS0 6284: 1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 6284 was prepared by Technical Committee
Id
lSO/TC IO, Technical drawings, product definition and relate
documentation, Subcommittee SC 8, Construction documentation.
This second edition cancels and replaces the first edition (IS0 6284:1985
1 I
which has been technically revised.
Annex A of this International Standard is for information only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
---------------------- Page: 8 ----------------------
SIST EN ISO 6284:2002
IS0 6284: 1996(E)
INTERNATIONAL STANDARD @ IS0
Indication of limit deviations
Construction drawings -
1 Scope
This International Standard specifies methods for the indication of limit deviations on construction drawings.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this
International Standard. At the time of publication, the editions indicated were valid. All standards are subject to
revision, and parties to agreements bas
...