|
SIST EN ISO 15614-13:2022
01-marec-2022
Nadomešča:
SIST EN ISO 15614-13:2012
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 13. del: Uporovno sočelno in obžigalno varjenje (ISO 15614-13:2021)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2021)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 13: Pressstumpf- und Abbrennstumpfschweißen (ISO
15614-13:2021)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 13:
Soudage en bout par résistance pure et soudage par étincelage (ISO 15614-13:2021)
Ta slovenski standard je istoveten z: EN ISO 15614-13:2021
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15614-13:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15614-13:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 15614-13:2022
EN ISO 15614-13
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2021
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 15614-13:2012
English Version
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 13:
Upset (resistance butt) and flash welding (ISO 15614-
13:2021)
Descriptif et qualification d'un mode opératoire de Anforderung und Qualifizierung von Schweißverfahren
soudage pour les matériaux métalliques - Épreuve de für metallische Werkstoffe -
qualification d'un mode opératoire de soudage - Partie Schweißverfahrensprüfung - Teil 13: Pressstumpf- und
13: Soudage en bout par résistance pure et soudage par Abbrennstumpfschweißen (ISO 15614-13:2021)
étincelage (ISO 15614-13:2021)
This European Standard was approved by CEN on 5 November 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15614-13:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15614-13:2022
EN ISO 15614-13:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15614-13:2022
EN ISO 15614-13:2021 (E)
European foreword
This document (EN ISO 15614-13:2021) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2022, and conflicting national standards shall be
withdrawn at the latest by June 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15614-13:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizat
...