|
SIST EN 61215-1-2:2017
01-julij-2017
1DGRPHãþD
SIST EN 61646:2008
Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 1-2. del:
Posebne zahteve za preskušanje fotonapetostnih modulov iz tankoslojnega kadmij
-telurja (CdTe)
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2:
Special requirements for testing of thin-film Cadmium Telluride (CdTe) based
photovoltaic (PV) modules
Terrestrische kristalline Silizium-Photovoltaik-(PV)-Module - Bauarteignung und
Bauartzulassung - Teil 1-2: Besondere Anforderungen für Prüfungen von
Cadmiumtellurid-(CdTe)-Photovoltaik-(PV)-Modulen
Modules photovoltaïques (PV) pour applications terrestres - Qualification de la
conception et homologation - Partie 1-2: Exigences particulières d'essai des modules
photovoltaïques (PV) au tellurure de cadmium (CdTe) à couches minces
Ta slovenski standard je istoveten z: EN 61215-1-2:2017
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN 61215-1-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61215-1-2:2017
---------------------- Page: 2 ----------------------
SIST EN 61215-1-2:2017
EUROPEAN STANDARD EN 61215-1-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 27.160 Supersedes EN 61646:2008
English Version
Terrestrial photovoltaic (PV) modules - Design qualification and
type approval - Part 1-2: Special requirements for testing of thin-
film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
(IEC 61215-1-2:2016)
Modules photovoltaïques (PV) pour applications terrestres - Terrestrische kristalline Silizium-Photovoltaik-(PV)-Module -
Qualification de la conception et homologation - Partie 1-2: Bauarteignung und Bauartzulassung - Teil 1-2: Besondere
Exigences particulières d'essai des modules Anforderungen für Prüfungen von Cadmiumtellurid-(CdTe)-
photovoltaïques (PV) au tellurure de cadmium (CdTe) à Photovoltaik-(PV)-Modulen
couches minces (IEC 61215-1-2:2016)
(IEC 61215-1-2:2016)
This European Standard was approved by CENELEC on 2017-01-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61215-1-2:2017 E
---------------------- Page: 3 ----------------------
SIST EN 61215-1-2:2017
EN 61215-1-2:2017
European foreword
The text of document 82/1182/FDIS, future edition 1 of IEC 61215-1-2, prepared by IEC/TC 82 “Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61215-1-2:2017.
The following dates are fixed:
(dop) 2017-10-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-04-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61646:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61215-1-2:2016 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61215-1-2:2017
EN 61215-1-2:2017
Annex ZA
(normative)
Normative references to international publications
with their corr
...