|
STANDARD
SIST EN 3155-032:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-032May 2009ICS 49.060 English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 032: Contacts, electrical, coaxial, 50 ohms,size 5, male, type D, crimp, class R - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion - Partie 032 : Contacts électriquescoaxiaux, 50 ohms, taille 5, mâles, type D, à sertir, classeR - Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 032: Elektrische koaxiale,Stifkontakte, 50 Ohm, Größe 5, Typ D, crimpbar, Klasse R- ProduktnormThis European Standard was approved by CEN on 31 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-032:2009: ESIST EN 3155-032:2009
EN 3155-032:2009 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Required characteristics .65Designation . 126Marking . 127Delivery conditions . 128Technical specification . 12Bibliography . 13 SIST EN 3155-032:2009
EN 3155-032:2009 (E) 3 Foreword This document (EN 3155-032:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn at the latest by November 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3155-032:2009
EN 3155-032:2009 (E) 4 Introduction The contacts defined by this standard are derived from those of SAE-AS39029/99, and are intermateable with those of SAE-AS39029/100. SIST EN 3155-032:2009
EN 3155-032:2009 (E) 5
1 Scope This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, size 5, type D, crimp, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-033. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General EN 3155-001:2008, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification1 EN 3682-001, Aerospace series — Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous — Part 001: Technical specification SAE-AS39029/99, Contacts, electrical connector pin, crimp removable, coaxial, size 5 (for DOD-C-83527 connectors)2 SAE-AS39029/100, Contacts, electrical connector, socket, crimp removable, coaxial, size 5 (for DOD-C-83527 connectors)2 MIL-DTL-22520G, Crimping tools, wire termination, general specification for3 MIL-I-81969/28, Installing and removal tools, connector electrical contacts, type II, class 2, composition C 3 TR 6058, A
...