|
SIST EN 61010-2-030:2010
01-december-2010
1DGRPHãþD
OSIST prEN 61010-2-030:2004
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO3RVHEQH]DKWHYH]DSUHVNXVQDLQPHULOQDYH]MD,(&
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-030: Particular requirements for testing and measuring circuits (IEC 61010-2
-030:2010)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-030: Besondere Bestimmungen für Prüf- und Messkreise (IEC 61010-2-030:2010)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-030: Prescriptions particulières pour les circuits de test et de
mesure (CEI 61010-2-030:2010)
Ta slovenski standard je istoveten z: EN 61010-2-030:2010
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-2-030:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61010-2-030:2010
---------------------- Page: 2 ----------------------
SIST EN 61010-2-030:2010
EUROPEAN STANDARD
EN 61010-2-030
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 19.080; 71.040.10
English version
Safety requirements for electrical equipment for measurement, control,
and laboratory use -
Part 2-030: Particular requirements for testing and measuring circuits
(IEC 61010-2-030:2010)
Règles de sécurité pour appareils Sicherheitsbestimmungen für elektrische
électriques de mesurage, de régulation et Mess-, Steuer-, Regel- und Laborgeräte -
de laboratoire - Teil 2-030: Besondere Bestimmungen für
Partie 2-030: Exigences particulières pour Prüf- und Messkreise
les circuits de test et de mesure (IEC 61010-2-030:2010)
(CEI 61010-2-030:2010)
This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61010-2-030:2010 E
---------------------- Page: 3 ----------------------
SIST EN 61010-2-030:2010
EN 61010-2-030:2010 - 2 -
Foreword
The text of document 66/417/FDIS, future edition 1 of IEC 61010-2-030, prepared by IEC TC 66, Safety
of measuring, control and laboratory equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 61010-2-030 on 2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
This Part 2-030 is to be used in conjunction with the latest edition of EN 61010-1, Safety requirements for
electrical equipment for measurement, control and laboratory use - Part 1: General requirements. It was
established on the basis of the 2010 edition of EN 61010-1. Amendments and revisions of Part 1 have
also to be taken into account and the dates when such changes become applicable will be stated in the
relevant amendment or revision of Part 1.
This Part 2-030 supplements or modifies the corres
...