SIST EN 15638:2009

Ice skates - Safety requirements and test methods

SIST EN 15638:2009

Name:SIST EN 15638:2009   Standard name:Ice skates - Safety requirements and test methods
Standard number:SIST EN 15638:2009   language:English language
Release Date:31-May-2009   technical committee:SPO - Sports
Drafting committee:   ICS number:97.220.20 - Winter sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Drsalke - Varnostne zahteve in preskusne metodeEislaufkomplets - Sicherheitstechnische Anforderungen und PrüfverfahrenPatins a glace - Exigences de sécurité et méthodes d'essaiIce skates - Safety requirements and test methods97.220.20Oprema za zimske športeWinter sports equipmentICS:Ta slovenski standard je istoveten z:EN 15638:2009SIST EN 15638:2009en,fr,de01-julij-2009SIST EN 15638:2009SLOVENSKI
STANDARD



SIST EN 15638:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15638April 2009ICS 97.220.20 English VersionIce skates - Safety requirements and test methodsPatins à glace - Exigences de sécurité et méthodes d'essaiEislaufkomplets - Sicherheitstechnische Anforderungenund PrüfverfahrenThis European Standard was approved by CEN on 5 March 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15638:2009: ESIST EN 15638:2009



EN 15638:2009 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Design .6 4.1 General .6 4.2 Requirements for design .6 4.2.1 Connection of the runner to the boot .6 4.2.2 Attachment of the blade in the blade holder .6 4.2.3 Linearity of the runner .6 4.2.4 Position of the runner .7 4.2.5 Impact resistance.7 4.2.6 Surface condition.7 4.2.7 Condition of the blade .7 5 Testing .8 5.1 General .8 5.2 Test specimen .8 5.3 Last .8 5.4 Connection of the runner to the boot .8 5.5 Resistance against impact loads .9 5.5.1 Conditioning .9 5.5.2 Lateral impact onto the blade .9 5.5.3 Frontal impact onto the blade tip and end . 10 5.6 Hardness of the runner . 11 6 Marking . 11 7 Information supplied by the manufacturer . 11 7.1 General . 11 7.2 Contents . 12 7.2.1 General . 12 7.2.2 Information about the construction of the ice skate . 12 7.2.3 Instructions for use . 12 7.2.4 Servicing and maintenance instructions . 12
SIST EN 15638:2009



EN 15638:2009 (E) 3 Foreword This document (EN 15638:2009) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15638:2009



EN 15638:2009 (E) 4 Introduction When elaborating this document, it was assumed that dimensions cannot be specified for the functional grinding of the blade mentioned in 4.2.7.2, as they depend on the use the ice skates are intended for and differ from user to user. SIST EN 15638:2009



EN 15638:2009 (E) 5 1 Scope This standard applies to ice skates intended for users with a body mass up to 100 kg for ice skating excluding the field of sports competitions. It specifies the minimum safety requirements for ice skates as well as requirements for test methods, marking and information supplied by the manufacturer to reduce the risk of injuries to both third parties and the user during their normal use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies.
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27