SIST EN ISO 9360-1:2009

Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000)

SIST EN ISO 9360-1:2009

Name:SIST EN ISO 9360-1:2009   Standard name:Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000)
Standard number:SIST EN ISO 9360-1:2009   language:English language
Release Date:31-May-2009   technical committee:VAZ - Healthcare
Drafting committee:   ICS number:11.040.10 - Anaesthetic, respiratory and reanimation equipment
SLOVENSKI STANDARD
SIST EN ISO 9360-1:2009
01-julij-2009
1DGRPHãþD
SIST EN ISO 9360-1:2000
$QHVWH]LMVNDLQGLKDOQDRSUHPD,]PHQMHYDOQLNLWRSORWHLQYODJH +0(V ]D
QDYODåHYDQMHGLKDOQLKSOLQRYYþORYHNXGHO+0(V]DXSRUDER]QDMPDQMãR
GLKDOQRSURVWRUQLQRPO ,62
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for
humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal
volumes of 250 ml (ISO 9360-1:2000)
Anästhesie- und Beatmungsgeräte - Wärme- und Feuchtigkeitsaustauscher zur
Anfeuchtung von Atemgasen beim Menschen - Teil 1: Wärme- und
Feuchtigkeitsaustauscher zur Verwendung bei Mindesthubvolumina von 250 ml (ISO
9360-1:2000)
Matériel d'anesthésie et de réanimation respiratoire - Échangeurs de chaleur et
d'humidité (ECH) utilisés pour humidifier les gaz respirés par les êtres humains - Partie
1: ECH pour utilisation avec des volumes courants d'au moins 250 ml (ISO 9360-1:2000)
Ta slovenski standard je istoveten z: EN ISO 9360-1:2009
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
SIST EN ISO 9360-1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9360-1:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 9360-1:2009
EUROPEAN STANDARD
EN ISO 9360-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS 11.040.10 Supersedes EN ISO 9360-1:2000
English Version
Anaesthetic and respiratory equipment - Heat and moisture
exchangers (HMEs) for humidifying respired gases in humans -
Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO
9360-1:2000)
Matériel d'anesthésie et de réanimation respiratoire - Anästhesie- und Beatmungsgeräte - Wärme- und
Échangeurs de chaleur et d'humidité (ECH) utilisés pour Feuchtigkeitsaustauscher zur Anfeuchtung von Atemgasen
humidifier les gaz respirés par les êtres humains - Partie 1: beim Menschen - Teil 1: Wärme- und
ECH pour utilisation avec des volumes courants d'au moins Feuchtigkeitsaustauscher zur Verwendung bei
250 ml (ISO 9360-1:2000) Mindesthubvolumina von 250 ml (ISO 9360-1:2000)
This European Standard was approved by CEN on 28 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9360-1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9360-1:2009
EN ISO 9360-1:2009 (E)
Contents Page
Foreword .3
Annex ZA (Informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9360-1:2009
EN ISO 9360-1:2009 (E)
Foreword
The text of ISO 9360-1:2000 has been prepared by Technical Committee ISO/TC 121 “Anaesthetic and
respiratory equipment” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 9360-1:2009 by Technical Committee CEN/TC 215 “Respiratory and anaesthetic equipment” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC]
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27